Seymour Stripe 20-657 Orange Fluorescent “Original Water Base” 6 Series Inverted Marking Paint. Price is per can. Net wt. 17 oz. of paint in a 20 oz. capacity can. 12 cans/case.

Seymour Stripe water-based marking paint is a fast drying permanent marking paint designed to be applied in the inverted position. Environmentally formulated, it is lead free and V.O.C. compliant. While this Seymour marking paint has a water base formulation, it will not wash away. Improved colors retain their vivid color for a longer period of time, even in direct sunlight. Safe on grass.

Exclusive spray tip and can are designed to work ONLY in the upside down position. Special new overcap allows fingertip control without removing the color coded cap. It may be applied by hand, with a SEYZ-605 Spot Marker, or with a SEYZ-606 Marking Stick.

Aspiring masons looking for a complete set of high-quality masonry tools should look no further. With the MARSHALLTOWN Bricklayer’s Apprentice Tool Kit, masons have every tool needed from a brick trowel to a masonry brush, stored in a durable canvas or nylon tool bag. MARSHALLTOWN Masonry Trowels, Brushes, and Brick Jointers are Made in the USA with Global Materials.

• Choose a canvas or nylon tool bag

• 33 11FG - 11" (279 mm) Brick Trowel, London Pattern

• 45 6D - 6 x 2-3/4" (152 x 70 mm) Pointing Trowel

• 52D - 5 x 2" (127 x 51 mm) Margin Trowel

• 80 - 1/2" and 5/8" (13 x 16 mm) Brick Jointer

• 86 - Wood Line Blocks

• 921 - Mason's Line Winder with 250' (76 m) braided line

• 6519 - Masonry Brush

• 93 - Joint Raker

• Masonry Trowels, Brushes, and Brick Jointers Made in the USA with Global Materials

Chapin's 19049 3.5-gallon Xtreme industrial Tri-poxy coated concrete sprayer is designed with chemical-resistant seals to handle VOC compliant sealer applications up to 50% - 55% acetone. Use it for concrete sealing, form oil, staining and other industrial applications. The 3.5-gallon tank is triple protected from dents, corrosion and rust with Chapin’s Tri-Poxy coating. The wide-mouth opening allows you to easily fill it and clean it after each application. It features a solid brass pump barrel, nozzle and shut-off, a 24-inch brass extension wand, and a 48-inch reinforced hose. Made in the USA with global materials and backed by Chapin’s 2-year limited warranty.

• Xtreme seals and gaskets: seals and gaskets handle VOC compliant sealer applications up to 50% - 55% acetone used in industrial and concrete applications: form oils, concrete sealants and general construction

• 5-gallon Tri-Poxy tank: Tri-Poxy coating on the tank provides triple protection against rust, corrosion and damage from denting; 4-inch mouth opening is wide enough to easily fill and drain the tank

• Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 2-year limited warranty

• Tri-Lock pump handle: twist and lock to tightly seal pump into the tank with the durable, metal Tri-Lock pump handle

• Components: chemical-resistant brass fan-top nozzle, 24-inch brass spray wand, and brass lock-on shut-off valve; 48-inch reinforced hose for a longer reach while working; attached holster on tank to keep wand secure while in storage

Our Original Crocodile Cloth® was designed for cleanup of industrial-size messes in greasy, grimy workplaces. This tough, general purpose cleaning cloth tackles all kinds of messes found in industrial, manufacturing and construction environments.

• DON’T JUST CLEAN, ATTACK: Designed to dissolve & absorb grease, grime, oil, paint, caulk, glue, & automotive messes in real work environments. Great on plastic, vinyl, metal, wood, leather, gym equipment, carpets, bamboo, fabrics, & more.
• MORE EFFECTIVE, MORE VALUE: Our giant 15″ x 10″ Crocodile Cloth® cleaning wipes are designed to scrub & absorb, meaning you need less wipes to clean the same mess. Our wipes stay moist longer & feature a super tough heavy-duty build.
• VERSATILE, MULTI-SURFACE WIPE: Tackle any mess, any size, on any surface! These heavy-duty disposable cloth hand wipes feature unrivaled tensile strength & uses a unique low-foaming degreaser formula that’s safe for nearly any & every surface. This is the only disposable cleaning wipe you need for tough jobs in the shop, factory, garage or home.
• SKIN SAFE: Crocodile Cloth® wipes are dermatologically tested & infused with aloe & vitamin E to be safe for your hands while eating through grease & oil. Every disposable wipe is formulated to stay wet outside the package for over an hour.
• NO MORE WIMPY WIPES: These oversized wipes aren’t just tough on messes, they’re incredibly strong and are no match for the competition. Crocodile Cloth® are 3X larger than standard wipes and are proudly Made in the USA of domestic and imported materials.

The MARSHALLTOWN Masonry Brush is the perfect cleaning tool. The quality bristles are made of white Tampico fiber and are securely set into a hardwood block. This product is Made in the USA with Global Materials.

• Bristles made of white Tampico fiber
• Set in a hardwood block
• Perfectly made in one size
• Made in USA with Global Materials

The Multi-Purpose Web Adhesive is a versatile solution designed for creating a non-staining, flexible, and permanent bond between various surfaces. This clear spray adhesive is ideal for both like and unlike materials, ensuring a strong hold that lasts.

Non-staining: Leaves no residue, maintaining the clean appearance of your projects.

Flexible Bond: Forms a durable and flexible connection that adapts to different surfaces.

Permanent Adhesion: Ensures a long-lasting bond for reliable performance.

Minimal Overspray: Reduces waste and keeps your work area clean.

Waterproof: Provides excellent resistance to moisture, making it suitable for various applications.

No Chlorinated Solvents: Safe for both users and the environment.

Adjustable Spray Tip: Allows you to control the vertical coverage, enhancing precision and ease of use.

A clear spray adhesive that forms a non-staining, flexible, permanent bond between like and unlike surfaces. Minimal overspray. Waterproof.

Contains no chlorinated solvents

Adjustable spray tip rotates to control vertical coverage

Each can contains 12 oz. of adhesive, and the product is available in a convenient pack of 12 cans. Produced by Champion's Choice, a trusted brand, and manufactured by Chase Products, this adhesive is a reliable choice for diverse bonding needs.

• Holds over 1 pound of chalk for fewer refills

• 100 or 110 feet giant string, and pull ring

• One-piece steel crank for long life

• Hooks onto tool belt

• Flexible construction forms to fit dips, slopes and inclines in sidewalks and walkways.
• Ultra-ADA Pads are designed for the visually impaired to feel the raised, truncated domes with their feet. This, in combination with the tapping cane, can alert them to a different surface than the surrounding concrete sidewalk and an upcoming intersection.
• Installs quickly and easily using adhesive and anchors (included).
• Better slip resistance than composites.
• Better impact resistance than composites.

PowerSCRUB is our roughest, toughest cleaning cloth yet, for your stickiest gunkiest, greasiest messes. One side is smooth to polish and absorb, and the other side has teeth to scour and scrub.

• DON’T JUST CLEAN; ATTACK: Get serious heavy duty cleaning power in just one wipe; Cut through the dirt & grime & get a real clean; Our wipes stay moist longer & feature a super tough heavy-duty build.
• CONTRACTOR GRADE STRENGTH: Tackle any mess, any size, on any surface! These heavy-duty disposable cloth hand wipes feature unrivaled tensile strength & super-absorbency that make them ultra-tough on messes.
• DUAL-SIDED ACTION: Scrubbing side is textured to scour through dried-on, baked-on or caked-on grease & grime on hands, tools & surfaces. Follow up with the smooth side to wipe the gunk away.
• HAND SAFE: Crocodile Cloth® wipes are dermatologically tested & infused with aloe & vitamin E, making it safe for hands.
• NO MORE WIMPY WIPES: These oversized wipes aren’t just tough on messes, they’re incredibly strong and are no match for the competition. Crocodile Cloth® are 3X larger than standard wipes and are proudly Made in the USA of domestic and imported materials.

• Used for building concrete forms
• 10 to a Bundle

• Used for building concrete forms
• 10 to a Bundle

HBR® is a closed-cell, polyethylene foam backer rod joint filler that is used as a backing material for elastomeric and other cold-applied sealants. It helps the sealant assume the optimum shape to prolong service life and acts as a barrier to the flow of sealant through the joint. It will not absorb water and is available in ¼” to 6” diameter

$.30 a foot

The 6" long stainless steel blade moves smoothly along edges of concrete sidewalks and slabs. This edger creates a 3/8" radius, with a 1/2" lip, on the edge of concrete slabs to prevents the edges from chipping with wear. The 6" wide tool provides the perfect amount of coverage on sidewalks and small projects. A steel mounting welded to blade attaches the smooth wood handle.

• 3/8" radius on stainless steel blade
• Prevent chipping of slabs with a smooth radius
• Steel mounting welded to blade
• Comfortable smooth wood handle

DAY1® Finishing Aid

Brickform DAY1 is a colloidal silica-based finishing aid that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 finishing aid increases cream and extends workability under adverse conditions such as high wind, heat, or low humidity. It eliminates the need to add water to the surface which can lead to premature surface failure. DAY1 does not alter the water-to-cement ratio and becomes a permanent part of the slab so there is no membrane or residue to remove.

Paired with a Bull Float, MARSHALLTOWN Magnesium Darbies help to level ridges and fill the voids left behind by screeding to make finishing your concrete slab easier. Choose between a tapered or standard Darby style blade. Both options are made from a lightweight magnesium material for superior durability. You also have your choice of length and handle configuration (single float or single float & knob). Our Magnesium Darbies are Made in the USA with Global Materials.

• Levels the ridges and fills the voids left behind by a screed
• Magnesium blade material is lightweight and durable
• Choose your preferred blade style, length, and handle configuration
• Made in the USA with Global Materials

Strong, Reusable Nails for Temporary Construction! Introducing the 8D Duplex Nails (also known as scaffolding nails or concrete form nails), a reliable solution for a range of temporary construction, concrete formwork, and scaffolding needs. Specially designed to meet the demands of construction projects, as well as being easy to remove and reuse! Crafted from 10-gauge steel, they are incredibly strong and highly resistant to bending.

16 Ga Pvc Coated Rebar Tie Wire

The patented MARSHALLTOWN Octagon Handles are specially designed for increased grip strength by an average of 20% for superior performance and offers a comfortable, slip-resistant hold even with wet or sweaty hands. This concrete extension tool is available in two styles: Insert or Swaged. Insert style handles are constructed from ribbed aluminum tubing and blue powder-coated to prevent oxidation from darkening your hands. Both styles have quick connect snap springs for easy attachment and are designed with tight tolerances to reduce sag when in use. You can also choose your preferred handle width. Swaged styles handles are Made in the USA with Global Materials.

• Octagon shape increases grip strength by an average of 20%

• Choose your preferred handle style and diameter

• Handles are 72”

• Sag and oxidation resistant

• Comes with quick connect snap springs for easy attachment

• Swaged style handles are Made in the USA with Global Materials

• (6/Case)(15.9#/Case)

These MARSHALLTOWN Octagon Placers feature a unique octagon profile handle that provides more surface area, which greatly increases grip when placing concrete regardless of gloved, wet, or sweaty hands. Choose between a 48” or 60” octagon handle length as well as a Standard or Open Angle blade style. Both options are available with or without a hook. All variations of this aluminum Placer are braced for additional strength and Made in the USA with Global Materials.

• Octagon profile provides handle enhanced grip for better control when placing concrete

• Lightweight aluminum design braced for additional strength

• Blade style: Standard or Open Angle

• Handle length: 48” or 60”

• Available with or without a hook

• Sold 5 per inner pack and ships LTL

• For dealers: quantities of 50 are marked by Part #’s ending in “-5”

• Made in the USA with Global Materials

MARSHALLTOWN Wood Backed Concrete Brooms are great tools for applying a non-slip or fine finish to newly finished concrete surfaces. Choose between a non-slip black polypropylene or horsehair bristles, or our memory resistant green nylon bristles for a light textured finish. All bristle options come set in a natural, lacquered hardwood block with a threaded hole that accepts any standard broom handle. Made in the USA with Global Materials.

• Sizes range from 18" to 48"
• Add texture to newly finished concrete
• Black polypropylene and horsehair bristles apply a non-slip finish
• Green nylon bristles are memory resistant and apply a light texture to concrete
• Polypropylene and horsehair bristle brooms feature a threaded hole that accepts standard broom handles
• *Green nylon broom only accepts 15/16” diameter handles
• Made in the USA with Global Materials

The MARSHALLTOWN Masonry Brush is the perfect cleaning tool. The quality bristles are made of white Tampico fiber and are securely set into a hardwood block. This product is Made in the USA with Global Materials.

• Bristles made of white Tampico fiber
• Designed in a hardwood block
• Perfectly made in one size
• Made in America with Global Materials

MARSHALLTOWN Open Angle Round Handled Pull Cretes are lightweight aluminum concrete tools for spreading and placing concrete as well as setting rebar. Their 19 ½” x 4” blade comes attached to a durable, red, powder-coated aluminum handle that measures 60” in length. This tool is also available with or without a hook. Our Pull Cretes are Made in the USA with Global Materials.

• Braced handle is strong enough to set rebar and spread and place concrete
• Lightweight aluminum material
• 60” handle has a powder-coated finish
• Available with or without a hook
• Sold 5 per inner pack and ships LTL
• Made in the USA with Global Materials

The MARSHALLTOWN Kneeler Board gives your knees extra support and comfort to minimize fatigue. The extra-large handle grips and foam pad are securely fastened to the polypropylene tray. This tool helps reduce pain and lets you focus on your paint and wallcovering work.

• Black foam pad fastened to a polypropylene tray

• Comes with extra-large handle grips

• The padded area is 19 x 13½-inch

• (12/Case)(34.6#/Case)

Cast from the finest magnesium, MARSHALLTOWN Cast Magnesium Hand Floats are designed with a broken-in shape ideal for smoothing and gliding over air entrained concrete. The 16” x 3 ⅛” blades are perfectly balanced, and the cast construction allows for extra knuckle clearance between blade and handle. Choose between a comfortable DuraSoft®, grippy DuraCork®, structural foam, or hardwood handle, available in your choice of standard, round, or large round handle styles. All variations of this product are Made in the USA with Global Materials.

Made from the finest magnesium material for superior durability

Glides over air entrained concrete for a smooth finish

Blade size: 16” x 3 ⅛”

Choose your preferred handle material and style

(6/Case)(7.3#/Case)

Fill joints easily with a MARSHALLTOWN Grout Bag. Choose a seamless, black vinyl Grout Bag with or without a metal tip or a seamless white, plastic Blu-Tip™ Grout Bag with a molded-tip. The molded-tip can be cut to any size. The QLT Grout Bags are disposable and are perfect for projects with hard-to-clean materials.

• Fill various sized joints between brick, block, and stonework

• MARSHALLTOWN Grout Bags are easy to clean and Made in the USA with Global Materials

• QLT Grout Bags are disposable (come in pack of 50)

• Black Vinyl Grout Bags are available with or without a ⅜” metal tip

Available in sleek black or classic white, our Downspout Leaf Filter is the perfect addition to any home exterior. Say goodbye to clogged downspouts and damaged home exteriors with our innovative and reliable solution. Order your Downspout Leaf Filter today and enjoy the peace of mind that comes with a clean and well-maintained home exterior.

FDM recommends black for those living in the North. Black gathers light and heats up during daylight hours to help melt freeze ups.

Product Details

Downspout Cleanout Leaf Filter

As a drainage contractor, one of our biggest complaints about downspout cleanouts was that they would spray and splash up against the house, which risks all kinds of damage to the home’s foundation.

We worked closely with engineers to create a downspout leaf filter and vented cleanout that would contain roof runoff water. This filled a much needed gap in the drainage market. I wish I had this part my whole career.

No More Splashing

Water falls through our leaf filter cleanout without any spraying or splashing. We designed it with a door that funnels the water through buried downspouts. When water enters the cleanout, it splashes off the inside of the door and sends the water down through the system.

Also, the shape of our vented cleanout allows water to funnel gradually. The fluid dynamics are second to none.

Vented Cleanout and Leaf Filter – All in One

First and foremost, this is a vented downspout cleanout, but we also built it as a leaf filter with a removable screen.

Patented Vent for Cleanout

Downspouts are powered by gravity. During a heavy rain event they can become full of water if there is nowhere to vent. Venting your downspout at the house will allow that water to keep velocity and flow at a higher speed.

Also, if you have a freeze up or if grass grows over your popup emitter, you’ll still be able to vent the water at the cleanout.

Removable Screen for Leaf Filter

This is the first cleanout on the market with a screen that you can remove, if desired. However, if you are trying to filter out leaves and large debris, we do recommend that you keep the screen in place.

You can also remove the center of the screen when you need to access the downspout line. This makes it easy to run a camera, a garden hose or a heat cable in the winter to keep water from freezing in the line.

Fits Any 3 or 4 in Drainage Pipe

No more shopping around to find different adapters and parts that fit. Our downspout cleanout leaf filter will connect to any 4 in. pipe.

• 4″ Corrugated single wall pipe
• 4″ Dualwall corrugated pipe
• 4″ PVC SDR 35
• 4″ PVC Schedule 40
• 4″ PVC Schedule 30
• 4″ Triple Wall septic field pipe
• 3″ Corrugated single wall pipe
• 3″ Dualwall corrugated pipe
• 3″ PVC SDR 35
• 3″ PVC Schedule 40
• 3″ PVC Schedule 30

The downspout will snap right in to our leaf filter cleanout with no need to seal or glue it.

Made in the USA

We are proud to say we manufactured our leaf filter cleanout in the USA – right  in   Michigan.

• Formulated to lubricate, condition, and protect your concrete and masonry tools from rust and corrosion. Gator Skin™ is blended to disburse evenly and adhere to the tool surface. Before you use a tool, spray it down to prevent concrete build up, saving time during clean-up. This product is safe to use on most metal, plastic, and rubber surfaces. Test on a small area before coating entire surface. A great product to use on moving parts on hand and walking tools. May also be used as a general lubricant. This is a 1 gallon plastic jug.

  • Lubricate, condition, and protect your tools
  • Prevents build-up of concrete on tools
  • Designed to evenly disburse and adhere to tools
  • Use as a general lubricant
  • 1 gallon jug

REFLEX® rubber expansion joint filler is made from 100% post-consumer rubber & plastic. The majority of the rubber comes from old tires that you see littering the shoulders of highways and overflowing landfills. When using REFLEX in the construction of just one single family residence, builders are able to consume the equivalent of 8.3 passenger car tires. So when planning your next project choose reflex. REFLEX® is a rubber expansion joint filler that is the first of its kind. Made from recycled materials, it is environmentally friendly, top of the line in quality, and made in the USA.

Fastflex (formerly branded as Isoflex) extends the service life of concrete by acting as an insulator in isolation joints and expansion joints while acting as a bond-breaker for sealants.

Fastflex is an ideal choice for concrete isolation joint filler applications around footings, foundations, structures, and curved or round bases and posts.  Typical projects include walkways, parking decks, curbs and gutters, concrete slabs, swimming pools,  and driveways.

This product is a closed-cell polyethylene foam joint filler and is available in continuous lengths in wall thicknesses of 1/2″ and widths from 1” through 6”.

Truper 31206, TR-BY-FC, Tru Pro Short D-Handle Square Point Shovel, 19-Inch Fiberglass, 20-Inch. 20-Inch Pro Grade fiberglass handle with D-grip for balance and control. Heavy duty 14 gauge steel blade for maximum toughness. Reinforced resin -Feetinsert-Feet in handle provides 400 lbs of handle strength. Rivetless, crimped-steel collar ring, solidly connects neck and handle. Thick Fiberglass handle with protective sleeve prevents splintering. Truper has been in the hand tool manufacturing business for over 40 years and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company-Feets global customers. Tru Pro is a premium line true to the specs of contractor-grade tools. The unit is also geared at the consumer who wishes to step up to high-end tools. Best Value at the top end of the market. Tru-Pro products features the heaviest gauge heads available, tab sockets or steel collars, along with a select choice of white ashwood handles for the optimum ratio of resistance and flexibility. Lifetime warranty backs all Tru-pro tools.

Truper 31205, TR-BY-F, Tru Pro Short D-Handle Round Point Shovel, 19-Inch Fiberglass, 20-Inch. 20-Inch Pro Grade fiberglass handle with D-grip for balance and control. Heavy duty 14 gauge steel blade for maximum toughness. Reinforced resin -Feetinsert-Feet in handle provides 400 lbs of handle strength. Rivetless, crimped-steel collar ring, solidly connects neck and handle. Thick Fiberglass handle with protective sleeve prevents splintering. Truper has been in the hand tool manufacturing business for over 40 years and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company-Feets global customers. Tru Pro is a premium line true to the specs of contractor-grade tools. The unit is also geared at the consumer who wishes to step up to high-end tools. Best Value at the top end of the market. Tru-Pro products features the heaviest gauge heads available, tab sockets or steel collars, along with a select choice of white ashwood handles for the optimum ratio of resistance and flexibility. Lifetime warranty backs all Tru-pro tools.

• Forged carbon steel with polished ends
• Overstrike protection to help prevent damage
• Hickory handle

Square-Point Shovel, Mid-Size Steps

• 16 Gauge blade
• 48 in Handle made with premium wood.
• Midsize forward-turned steps for improved foot stability with oval pattern perforations for traction control.
• Larger collar for increased head-to-handle connection strength.
• Innovative EZ Digger wider design provides bigger step support area.

This 72" lightweight aluminum button bull float handle features a 1-3/4" diameter for easy handling. The handle is anodized silver aluminum which stands out on a jobsite. Anodized aluminum prevents hands from turning black caused by oxidation. Swaged design fits multiple handles together without extra inserts. The nesting design secures the handle to brackets and other handles for an extended reach. A double button clip (CC289-01) is attached to each handle to connect to brackets or other handles. This snap handle fits easily on Kraft Tool double tilt action float brackets (#CC270, CC290, CC294, and CC296) , or single tilt bracket (#CC666, CC696 and #CC697). The handle fits in Gator Tools™ Brackets (#GF10330, GF11401, GF11600). Handle fits Kraft Tool's Multi-Twist™ brackets (#CC686, CC687, CC688) with the Multi Twist™ Button Handle Bracket (CC689). This handle can also be attached to clevis or threaded brackets with an adapter. Must purchase in quantities of 6, priced per each. Click here to purchase in quantities of 3.

SAFETY FIRST: Metal handles should not be used near electrical wires.

• Lightweight aluminum handle
• 1-3/4 In. diameter
• Swaged design nests multiple handles together
• Swaged design means no loose inserts
• Anodized aluminum keeps hands from turning black from oxidation
• Bright silver color is easy to spot on job site
• Single Button Clip secures connection
• Use with Double-Tilt or Single-Tilt Action Brackets
• Use on threaded or clevis brackets with adapters

Made with of Genuine Extru-Lite™ magnesium which is 30% lighter than similar aluminum screeds. Quality material won't rust extending the life and use of tool. This screed are built for strength and rigidity, but lightweight enough for the largest of jobs. The 16' screed is easy to move along forms on large slab projects. The 2" x 4" size is comfortable to hold while hand screeding. Thicker walls make up the 2" side of the screed to meet our uncompromising standards in holding its shape. Plastic end caps extend the life of the tool by eliminating the opportunity for concrete and other materials to build-up within the screed. Popular for leveling material in concrete paving and landscape work. Use with Screed Handles (CC503) for more control, sold separately. Must ship via truck.

• Genuine Extru-Lite Magnesium - 30% lighter than aluminum
• Built for strength and rigidity
• Quality material won't rust
• Thicker wall holds shape
• End caps prevent build up within tool

The Gold Standard of concrete placers! This placer features a strong, lightweight aluminum head. The 19-1/2" x 4" blade is angled with an optimal curve to easily push and pull material into place as the user spreads and levels concrete. The head provides a strong wide base for moving wet concrete. The blade is welded to the handle for additional toughness. Two aluminum braces connects the blade and handle for extra strength when moving material. A 60" gold anodized aluminum handle with textured foam grip completes the tool. A 1-1/4" diameter handle is lightweight and easy to grasp. The handle is anodized to prevent hands from turning black from oxidation. The bright gold is easy to see on the jobsite. Ships assembled for immediate use. Bundle of 5 placers, priced per each. Must order in quantities of 5. Must ship via truck.

• Lightweight 19-1/2 In. x 4 In. aluminum head
• Curved head angled for perfect leverage in moving concrete
• Aluminum braces provide reinforced strength to head
• Blade and handle welded for extra toughness
• Anodized aluminum keeps hands from turning black from oxidation
• Ships assembled
• Must order in quantities of 5, priced per each
• Must ship via truck

The perfect angle for moving concrete into place! This placer features a strong heavy-duty aluminum blade. The 19-1/2 In. x 4 In. head provides a strong wide base for moving wet cement. A 60 degree angle on the blade provides the optimal curve, or "right angle" to easily push and pull material into place as you spread and level the concrete. The blade is welded to the handle for exceptional toughness on the job. Two aluminum braces connect the blade to the handle for strength and rigidness in the hardest of materials. A 60 In. blue anodized aluminum handle with foam grip completes the tool. The handle measures 1-3/8 In. in diameter for a comfortable grip. The handle is anodized to prevent hands from turning black from oxidation. Ships assembled for immediate use. Bundle of 5 placers, priced per each. Must order in quantities of 5. Must ship via truck.

• Lightweight 19-1/2 In. x 4 In. aluminum head
• 60° angle provides the best working angle
• Head curved to maximize movement
• Heavy-duty aluminum braces provide reinforced strength to head
• Blade is welded to handle for support
• 60 In. Anodized handle with foam grip

Strong plastic construction keeps your hand float within arms reach. This hook attaches to your belt, pants, or back pocket to keep your hands free, but your tools convenient. Use it to hold Hand Floats, Edgers, Groovers, Trowels, or other tools needed around the job site. Includes 1 Float Hook

• Durable plastic construction
• Designed to firmly attach to belt or pocket
• Open bottom design hooks to belt instead of threaded thru belt
• Holds hand floats and more close to your person
• Bright orange label makes it easy to find on the job site
• Package includes 1 Float Hook

• Used for building concrete forms
• 10 to a Bundle

Expert Filtration for Sediment-Laden Stormwater

You can tell it’s a Dandy the moment you open it up. Our flagship product, the patented Dandy Bag®, is designed to take a lot of hard knocks. Use the Dandy Bag with flat grates (including round) and mountable curbs to reliably filter out all sludgy sediment-laden stormwater. The suspended solids are allowed to settle out of the slowed flow and are captured by the Bag prior to entering the inlet, ensuring ongoing compliance-level performance.

Unique Product Benefits

• Unique, patented design keeps silt, sediment and debris out of storm systems

• Reduces or eliminates the need to flush or clean inlets

• Bright orange monofilament geotextile can be seen in any weather

• Sizes built to fit any inlet in any municipality

• Easy to install, maintain and inspect

• Can be reused multiple times, unlike other sediment bags

• Available with optional oil absorbents

MARSHALLTOWN Walking Edger/Groover Replacement Brackets are available in your choice of either an all-angle or combo-adjust bracket. Both options fit MARSHALLTOWN’s walking edgers and groovers and are Made in the USA with Global Materials.

• Fits MARSHALLTOWN Concrete Walking Edgers and Groovers
• Choose between an all-angle or combo-adjust replacement bracket
• Made in the USA with Global Materials

MARSHALLTOWN Tape Measures are crucial for all Masonry jobs. These tools come with a soft grip, wide belt clip and are self retracting. Choose between a 25’ Standard, 16’ Brick Spacing, 16’ Modular Spacing or 16' Canadian Spacing Tape Measure to suit your needs.

• Helps you measure your workspace accurately
• Comes with a soft feel grip and a wide belt clip for easy mobility

3 -1/2# TIE WIRE 16Ga

The MARSHALLTOWN Pointing Trowel is ideal for filling small cavities and repairing crumbling mortar joints. Each trowel is forged from a single piece of high carbon steel and is available in either London or Philadelphia patterns. All blade pattern options are available in lengths ranging from 4” to 7” and widths between 2” to 3”. Choose between a resilient DuraSoft® handle, grippy DuraCork®, or a classic hardwood handle with metal ferrule. For jobs that require extra flexibility in tight spots, choose the specially tempered “Philadelphia w/ Extra Flexibility” in the pattern attribute section. All Pointing Trowels are Made in the USA with Global Materials.

• Essential for detail and repair work
• Forged from a single piece of high carbon steel for strength and durability
• Tempered, ground, and polished from heel to toe for flexibility
• Various sizes available
• Choose your handle material: resilient DuraSoft®, grippy DuraCork®, or classic hardwood
• Made in USA with Global Materials

The MARSHALLTOWN Margin Trowel’s slim flat-nosed design helps you easily level and spread mortar or tile adhesive into tight places where larger trowels won’t fit. The 5”, 6”, or 8” blade and tang are forged from a single piece of durable high carbon steel that is then tempered, ground, and polished for maximum balance and flexibility. Choose between our resilient DuraSoft® with an integral finger guard, grippy DuraCork®, or classic hardwood handle with metal ferrule. This product is Made in the USA with Global Materials.

• Spreads mortar or tile adhesive in tight spaces
• Forged from a single piece of high carbon steel
• Tempered, ground, and polished for flexibility and durability
• Available in a range of sizes
• Choose your handle material: resilient soft grip DuraSoft®, grippy DuraCork®, or traditional hardwood

The 2.5 mil Yellow Caution Tape warns pedestrians of restricted access or danger areas. Durable, weather-resistant polyethylene film prevents accidental tearing. Bold, black 2” letters are easy to read. Stays flexible from below freezing to 100°F.

Product Overview

• 2.5 mil Yellow Caution Tape

• Warns pedestrians of restricted access or danger areas

• Durable, weather-resistant polyethylene film prevents accidental tearing

• Bold, black 2” letters are easy to read

• Stays flexible from below freezing to 100°F

Application: High speed blade with split segment design cuts cured and green concrete, brick and block, pavers, stone, precast, ductile iron and asphalt. Best suited for harder materials.

Features: Laser welded combo blade, very soft bond.

• 14″ x .125 x 1" 20mm

Preferred by professionals for its light weight yet rugged durability, our Industrial Poly Concrete sprayer is the perfect fit. The 3-gallon poly tank has a wide mouth opening for easy filling and cleaning and a built-in pressure relief valve. Equipped with a 24-inch brass wand, brass shut-off with lock-on feature and metal pump handle.

• 3-Gallon poly tank with wide mouth opening for easy filling and cleaning

• Compatible for most professional concrete applications, curing compound, form oils, waterproofing and coatings

• 24-inch brass wand, nozzle and shut-off with lock-on feature

• Pressure relief valve built into the tank

• Chemical-resistant seals

Made from lightweight aluminum, MARSHALLTOWN's Ezyscreed™ Combo Screed has a dual-edge design. The sharp edge easily cuts down any high spots to make a level surface and the round edge conveniently creates a smooth surface, mimicking a Bull Float. This combo screed is created in lengths ranging from 3-12 feet, all easily screeding your concrete and can also be used as a check rod. The handle has ridges for better grip and a built-in level that you can use to check your work.

• Lightweight aluminum material

• Comes designed with a sharp and round edge

• Lengths ranging from 3ft-12ft

• Built-in level to check your work

Made from lightweight aluminum, MARSHALLTOWN's Ezyscreed™ Combo Screed has a dual-edge design. The sharp edge easily cuts down any high spots to make a level surface and the round edge conveniently creates a smooth surface, mimicking a Bull Float. This combo screed is created in lengths ranging from 3-12 feet, all easily screeding your concrete and can also be used as a check rod. The handle has ridges for better grip and a built-in level that you can use to check your work.

• Lightweight aluminum material

• Comes designed with a sharp and round edge

• Lengths ranging from 3ft-12ft

• Built-in level to check your work

The MARSHALLTOWN RotaLeveler™ is the best Bull Float Bracket for all your concrete needs. This bracket fits all two- and four-hole Bull Floats, and it accepts most 1¾” and 1⅜” push-button handles without the need for adapters. This tool is chain driven and enables you to easily adjust, control, and smoothly operate your Bull Float. Made in the USA with Global Materials.

• Mounts all two- and four-hole Bull Floats

• Accepts most 1 ¾” and 1 ⅜” push-button handles

• Features easy control adjustment, smooth operation, and a large protected grease reservoir

• Chain driven and easy to clean

• Made in the USA with Global Materials

• (1/Case)(3.1#/Case)

Our contractor-grade QLT Bull Float Replacement Blades help you produce a quality finish. Choose a round or square blade, both offered in many sizes and a choice between magnesium or aluminum. These replacement blades are Made in the USA with Global Materials.

• Blades range in length from 36" to 72"

• Blades have a width of 8" (203 mm)

• Choose aluminum or magnesium blade

• Made in the USA with Global Materials

• (3/Case)(21.7#/Case)

A brick hammer is a hammer with a flat face and a chisel-like blade on the other end. It's used to break, trim, and cut brick, stone, or concrete. Brick hammers are also known as stonemason's hammers, scutch hammers, or rock hammers.

The MARSHALLTOWN Brick Jointers smooth joints between bricks. Built with high carbon steel, this product is designed for different joint sizes on each end to give you the best variety on the job. Our contractor-grade QLT Brick Jointers are made from carbon steel and polished to make a slick joint. MARSHALLTOWN Brick Jointers are Made in the USA with Global Materials.