Solvent-Based, High-Solids, Non-Yellowing Cure & Seal for Concrete

SUPER DIAMOND CLEAR 350 is a state-of-the-art concrete curing compound and cure & seal specially designed with a high solids formulation to provide the most efficient moisture retention for proper cement hydration and strength gain, as well as protection from liquids, weathering, and abrasion. SUPER DIAMOND CLEAR 350 is particularly well suited for exterior architectural concrete where membrane yellowing is undesirable. It is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent-based curing and sealing products while ensuring compliance with VOC laws in regulated areas. SUPER DIAMOND CLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

HAZARDOUS SHIPPING RATES APPLIED TO COST

UPS SHIPPING COSTS STILL APPLY, EXPECT 1-2 DAY DELAY AFTER PURCHASE TO SHIP

AVAILABLE IN 5 GAL

https://www.euclidchemical.com/fileshare/ProductFiles/msds/359ADC_05_U.pdf

VOCOMP_®-20
Water-Based, Acrylic, Concrete Curing and Sealing Compound

DESCRIPTION

5 Gallon Pail

VOCOMP-20 water-based acrylic curing and sealing compound is formulated using special acrylic polymers in a true water-based carrier. Once properly applied, VOCOMP-20 provides a durable film for efficient moisture retention.  VOCOMP-20 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual confirmation of coverage. VOCOMP-20 dries clear to provide a transparent sheen finish. The sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish that offers improved resistance to chemicals and wear.

VOCOMP-20 may help minimize hair-checking, premature cracking, dusting, and spalling. However, good concrete and good concreting practices should be used, as VOCOMP-20 is not a cure-all for improperly designed, placed, and/or finished concrete.  Refer to American Concrete Institute (ACI) 201, Guide for Durable Concrete.

USES

VOCOMP-20 water-based acrylic curing and sealing compound may be quickly and easily applied to simultaneously cure and/or seal new interior or exterior as well as vertical or horizontal concrete surfaces. It is ideal for application on sidewalks, basement and garage floors, patios, driveways, and parking areas. VOCOMP-20 dries very quickly to protect and enhance the natural appearance of concrete.

FEATURES/BENEFITS

• Permeable film allows moisture in cured concrete to evaporate.
• Ready-to-use, non-yellowing, water-based compound that cures and/or seals concrete in one quick and easy application.
• Minimizes hair-checking, premature cracking, dusting, and spalling.
• Dries quickly on new concrete to a durable, clear sheen finish that protects and enhances the natural appearance of concrete.
• Ideal for application on interior, exterior, horizontal, and vertical concrete surfaces.
• Tough, durable finish offers improved resistance to chemicals and wear.
• Application tools may be cleaned with soap and water while still wet.
• VOC-compliant.

The Multi-Purpose Web Adhesive is a versatile solution designed for creating a non-staining, flexible, and permanent bond between various surfaces. This clear spray adhesive is ideal for both like and unlike materials, ensuring a strong hold that lasts.

Non-staining: Leaves no residue, maintaining the clean appearance of your projects.

Flexible Bond: Forms a durable and flexible connection that adapts to different surfaces.

Permanent Adhesion: Ensures a long-lasting bond for reliable performance.

Minimal Overspray: Reduces waste and keeps your work area clean.

Waterproof: Provides excellent resistance to moisture, making it suitable for various applications.

No Chlorinated Solvents: Safe for both users and the environment.

Adjustable Spray Tip: Allows you to control the vertical coverage, enhancing precision and ease of use.

A clear spray adhesive that forms a non-staining, flexible, permanent bond between like and unlike surfaces. Minimal overspray. Waterproof.

Contains no chlorinated solvents

Adjustable spray tip rotates to control vertical coverage

Each can contains 12 oz. of adhesive, and the product is available in a convenient pack of 12 cans. Produced by Champion's Choice, a trusted brand, and manufactured by Chase Products, this adhesive is a reliable choice for diverse bonding needs.

EVERCLEAR 350 is a pure acrylic curing compound and cure & seal that protects and enhances the appearance of concrete with a clear, non-yellowing film that is more durable than standard polymer blend cure and seal products. EVERCLEAR 350 is formulated in an exempt solvent carrier formulated for use in VOC-regulated areas. EVERCLEAR 350 is designed to enhance the color of stamped concrete, exposed aggregate, and colored concrete pavers, making these surfaces look deeper and richer in appearance. It provides protection against the damaging effects of traffic, weather, and de-icing salts while allowing the concrete to “breathe”. Applied properly, EVERCLEAR 350 will not turn white in the presence of moisture. EVERCLEAR 350 gives concrete a satin finish that highlights the color and texture of surfaces. EVERCLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

HAZARDOUS SHIPPING RATES APPLIED TO COST

UPS SHIPPING COSTS STILL APPLY, EXPECT 1-2 DAY DELAY AFTER PURCHASE TO SHIP

https://www.euclidchemical.com/fileshare/ProductFiles/msds/359TBN_05_U.pdf

DAY1® Finishing Aid

Brickform DAY1 is a colloidal silica-based finishing aid that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 finishing aid increases cream and extends workability under adverse conditions such as high wind, heat, or low humidity. It eliminates the need to add water to the surface which can lead to premature surface failure. DAY1 does not alter the water-to-cement ratio and becomes a permanent part of the slab so there is no membrane or residue to remove.

DUOGARD_®
VOC COMPLIANT Form Release Agent

DESCRIPTION
DUOGARD multi-reactive form release is composed of an organic chemical that reacts with the alkali content of concrete to form a release film that effectively inhibits the bonding of the concrete to the form. In addition, the product also contains a high molecular weight, non-reactive, chemically inert ingredient to assist in clean, quick form release and removal. These exclusive ingredients combine the effectiveness of a chemically reactive type and an inert barrier type to provide a doubly effective separation … DUO … and the ultimate in form release.

USES
DUOGARD can be used on forms such as wood, steel, aluminum, fiberglass-reinforced, all grades of plywood (pre-oiled, overlaid, LDO, NDO, HDO, MDO), epoxy-coated, and urethane-coated,  as well as fiber tubes.  DO NOT USE on expanded polystyrene (foam), rubber, latex, or latex forms made from SBR or natural rubber.  Wood forms should be saturated prior to first use. DUOGARD increases the life of wood forms by penetrating into the wood to waterproof and prevent deterioration. It also reduces maintenance requirements on metal forms by forming a rustproof film that makes the metal form essentially self-cleaning and rust-free.

DUOGARD should be applied to fiber tube forms even though they may be pre-coated. Tubes will strip much easier, even 60 to 90 days later. If tubes are stripped in 5 to 10 days, hand rubbing is greatly facilitated when tubes are coated with DUOGARD.

DUOGARD also cuts machine cleanup time because it minimizes concrete buildup. Pavers, trucks, mixers, spreader-finishers, buggies, chutes, and other types of equipment should be sprayed daily with DUOGARD for easy cleanup and rust prevention. DUOGARD can be applied on forms for pre-stressed and precast concrete to produce a better and cleaner cast. The product will not stain or discolor concrete. DUOGARD is also available in a true water-based formula, DUOGARD II.

FEATURES/BENEFITS

Liquid Bonding Admixture

AKKRO-7T is a non-redispersable, liquid bonding admixture used to produce polymer modified concrete and mortar. AKKRO-7T is a milky white, water based emulsion of high solids acrylic polymers and modifiers. AKKRO-7T is non-yellowing and has excellent resistance to ultraviolet degradation, heat and most common chemicals. AKKRO-7T does not alter the color of the mixture.

**THIS PRODUCT IS FOR SALE AND USE IN OHIO ONLY**

1325-CLEAR water-emulsion, wax-based concrete curing compound is an excellent cure for interior, exterior, horizontal, and vertical concrete surfaces. When properly applied, the product provides a premium-grade film which optimizes water retention. 1300-CLEAR appears white in color when wet, but dries clear. It is also available with a red fugitive dye to visually aid application coverage.

USES

1325-CLEAR is used on both interior and exterior, horizontal or vertical concrete applications, where subsequent surface treatments will not be applied.

FEATURES/BENEFITS

• When properly applied, provides a premium-grade film which optimizes water retention.
• Furnished as a ready-to-use, true water-based compound.
• Produces hard, dense concrete … minimizes hair-checking, thermal cracking, dusting, and other defects.
• Enhances the functional capabilities of concrete by “sealing in” the performance assets of strength and long life.
• Offers a compressive strength significantly greater than improperly cured or uncured concrete.
• Increases tensile strength for greater resistance to cracking and surface crazing.
• Improves resistance to abrasion and the corrosive action of salts and chemicals … minimizes shrinkage.
• Applies quickly and easily with conventional commercial spray equipment.

DIAMOND CLEAR 350 is a low VOC, non-yellowing concrete curing compound and cure & seal used to cure and seal exterior concrete. DIAMOND CLEAR 350 is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent based curing and sealing products while ensuring compliance with VOC laws in regulated areas. DIAMOND CLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

HAZARDOUS SHIPPING RATES APPLIED TO COST

UPS SHIPPING COSTS STILL APPLY, EXPECT 1-2 DAY DELAY AFTER PURCHASE TO SHIP

https://www.euclidchemical.com/fileshare/ProductFiles/msds/359_55_U.pdf

Basic Use: Hydraulic Cement is a fast-setting cement compound that stops pressure water leaks in concrete and other masonry structures at once. This special cement is made in two grades: Fast-Set and Regular-Set. Fast-Set Hydraulic Cement will harden is just three minutes and Regular-Set will set in three to five minutes.

Single-Component, Non-sag, Polyurethane Hybrid Sealant

The 1600-WHITE series of water-based, white-pigmented concrete curing compounds are wax-based dispersions with selected white pigments. When properly applied, 1600-WHITE forms a premium-grade membrane, which optimizes water retention. The white pigment reflects the sun’s rays to help keep the concrete surface cooler and prevent excessive heat buildup.

USES
1600-WHITE is ideal for application on exterior, horizontal surfaces, such as highways, airports, and street and curb paving.  1600-WHITE is not recommended for residential applications. The product provides optimum curing when protection from the sun’s heat is desired.

The BARWALT Caulking Guns are ideal for effortlessly applying caulk, adhesive, or sealant. Choose from two styles: Standard Caulking Gun or Super Caulking Gun. The Standard Caulking Gun is a cost-effective, quality tool that is perfect for smaller jobs that need occasional caulking. The Super Caulking Gun is ideal for the big jobs requiring more caulking. This tool is well-balanced and will help you get the job done with less fatigue.

• Effortlessly apply caulk, adhesive, or sealant
• Standard Caulking Gun has 1/10 gal (13 oz.) cartridge, ratchet advancing mechanism, a sturdy steel construction, and is painted to resist corrosion

An asphalt emulsion which contain no solvents. Comes in convenient squeeze bottle with an adjustable spout to fill cracks up to ½ “ width. Filler is rubberized for flexibility. DO NOT FREEZE.

An asphaltic sealer formulated with sand aggregate and latex to provide additional traction and skid resistance. Ideal for steeply pitched driveways. Beautifies and fills in hairline cracks. DO NOT FREEZE.

A contractor grade asphalt sealer designed to protect and beautify asphalt surfaces, fill in hairline cracks, and provide increased traction. Formulated with a polymer that will increase the life and flexibility of the asphalt surface. DO NOT FREEZE.

Basic Use: Hydraulic Cement is a fast-setting cement compound that stops pressure water leaks in concrete and other masonry structures at once. This special cement is made in two grades: Fast-Set and Regular-Set. Fast-Set Hydraulic Cement will harden is just three minutes and Regular-Set will set in three to five minutes. 

A premium grade cold patch blended with mineral aggregate and selected asphalt. Ready to use from the bag. Seasonally adjusted to its always easy to use. Shovel material into chuckhole and compress. Offers you the same patching material approved and recommended by State and Local Highway Departments and Professional Contractors in convenient 50# bags. DRIVEGUARD Chuckhole Patch and save on repairs. It's easy to use and can be applied in any weather. Achieve a professional and permanent repair (when used over a solid base) in just 3 easy-to-do steps.