Solvent-Based, High-Solids, Non-Yellowing Cure & Seal for Concrete

SUPER DIAMOND CLEAR 350 is a state-of-the-art concrete curing compound and cure & seal specially designed with a high solids formulation to provide the most efficient moisture retention for proper cement hydration and strength gain, as well as protection from liquids, weathering, and abrasion. SUPER DIAMOND CLEAR 350 is particularly well suited for exterior architectural concrete where membrane yellowing is undesirable. It is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent-based curing and sealing products while ensuring compliance with VOC laws in regulated areas. SUPER DIAMOND CLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

HAZARDOUS SHIPPING RATES APPLIED TO COST

UPS SHIPPING COSTS STILL APPLY, EXPECT 1-2 DAY DELAY AFTER PURCHASE TO SHIP

AVAILABLE IN 5 GAL

• Cure and seal compounds
• Curing and sealing agents
• Membrane-forming curing compounds
• Sealing curing compounds
• Concrete surface sealers with curing properties

VOCOMP_®-20
Water-Based, Acrylic, Concrete Curing and Sealing Compound

DESCRIPTION

5 Gallon Pail

VOCOMP-20 water-based acrylic curing and sealing compound is formulated using special acrylic polymers in a true water-based carrier. Once properly applied, VOCOMP-20 provides a durable film for efficient moisture retention.  VOCOMP-20 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual confirmation of coverage. VOCOMP-20 dries clear to provide a transparent sheen finish. The sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish that offers improved resistance to chemicals and wear.

VOCOMP-20 may help minimize hair-checking, premature cracking, dusting, and spalling. However, good concrete and good concreting practices should be used, as VOCOMP-20 is not a cure-all for improperly designed, placed, and/or finished concrete.  Refer to American Concrete Institute (ACI) 201, Guide for Durable Concrete.

USES

VOCOMP-20 water-based acrylic curing and sealing compound may be quickly and easily applied to simultaneously cure and/or seal new interior or exterior as well as vertical or horizontal concrete surfaces. It is ideal for application on sidewalks, basement and garage floors, patios, driveways, and parking areas. VOCOMP-20 dries very quickly to protect and enhance the natural appearance of concrete.

FEATURES/BENEFITS

• Permeable film allows moisture in cured concrete to evaporate.
• Ready-to-use, non-yellowing, water-based compound that cures and/or seals concrete in one quick and easy application.
• Minimizes hair-checking, premature cracking, dusting, and spalling.
• Dries quickly on new concrete to a durable, clear sheen finish that protects and enhances the natural appearance of concrete.
• Ideal for application on interior, exterior, horizontal, and vertical concrete surfaces.
• Tough, durable finish offers improved resistance to chemicals and wear.
• Application tools may be cleaned with soap and water while still wet.
• VOC-compliant.

SPEC MIX® Masonry Cement & Sand mortar is a dry preblended mortar mix containing masonry cement and dried masonry sand formulated for superior bond, water retention and board life. SPEC MIX Masonry Cement & Sand mortar is available in color and is engineered for the installation of CMU and brick units where high mortar workability and board life is required for good bond.  It comes in Types M, S and N, and each designation meets ASTM C 270, ASTM C 1714 and CSA A179 requirements. In addition to custom mix designs that are available for specific applications or properties, the standard Masonry Cement & Sand mortar is designed to be compatible with the characteristics of the specified masonry unit. It is acceptable for all types of masonry construction, below or above grade when manufactured to the appropriate specification. Product submittal information available upon request.

SPEC MIX Masonry Cement & Sand mortar is produced under strict manufacturing standards, and complete quality control measures are implemented with each batch. A digital printout displaying the proper proportions per batch may be kept as a permanent record. Each SPEC MIX manufacturer certifies that SPEC MIX masonry products are designed to meet the project specifications and applicable ASTM, TMS and CSA standards.

SPEC MIX® Masonry Cement & Sand Mortar is available in 80 lb. (36.3 kg.) packages for easy hand loading or in 3,000 lb. (1,360.8 kg.) reusable bulk bags to be used with the various

Quikrete concrete mix is a must have for setting fence posts, lamp posts, deck posts, and mailbox post. This concrete mix is designed for applications where 2" thick or more concrete is required, and is also perfect for sidewalks, ramps, steps, foundation work, or floor. Due to the nature of this product, shipping must be quoted on a per order basis. Quikrete is available for pick-up at Hoover Fence Co. in Newton Falls, OH 44444.

• Mix consists of proportionately blended gravel, sand, and Portland cement.
• Meets compressive strength requirements of ASTM C387.
• 60 minute working time.
• High compression strength of 4000 psi.
• Sold in 80 lb bags.

 MCS SM 300 - item #19021300

Chapin's 19049 3.5-gallon Xtreme industrial Tri-poxy coated concrete sprayer is designed with chemical-resistant seals to handle VOC compliant sealer applications up to 50% - 55% acetone. Use it for concrete sealing, form oil, staining and other industrial applications. The 3.5-gallon tank is triple protected from dents, corrosion and rust with Chapin’s Tri-Poxy coating. The wide-mouth opening allows you to easily fill it and clean it after each application. It features a solid brass pump barrel, nozzle and shut-off, a 24-inch brass extension wand, and a 48-inch reinforced hose. Made in the USA with global materials and backed by Chapin’s 2-year limited warranty.

• Xtreme seals and gaskets: seals and gaskets handle VOC compliant sealer applications up to 50% - 55% acetone used in industrial and concrete applications: form oils, concrete sealants and general construction

• 5-gallon Tri-Poxy tank: Tri-Poxy coating on the tank provides triple protection against rust, corrosion and damage from denting; 4-inch mouth opening is wide enough to easily fill and drain the tank

• Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 2-year limited warranty

• Tri-Lock pump handle: twist and lock to tightly seal pump into the tank with the durable, metal Tri-Lock pump handle

• Components: chemical-resistant brass fan-top nozzle, 24-inch brass spray wand, and brass lock-on shut-off valve; 48-inch reinforced hose for a longer reach while working; attached holster on tank to keep wand secure while in storage

EVERCLEAR 350 is a pure acrylic curing compound and cure & seal that protects and enhances the appearance of concrete with a clear, non-yellowing film that is more durable than standard polymer blend cure and seal products. EVERCLEAR 350 is formulated in an exempt solvent carrier formulated for use in VOC-regulated areas. EVERCLEAR 350 is designed to enhance the color of stamped concrete, exposed aggregate, and colored concrete pavers, making these surfaces look deeper and richer in appearance. It provides protection against the damaging effects of traffic, weather, and de-icing salts while allowing the concrete to “breathe”. Applied properly, EVERCLEAR 350 will not turn white in the presence of moisture. EVERCLEAR 350 gives concrete a satin finish that highlights the color and texture of surfaces. EVERCLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

HAZARDOUS SHIPPING RATES APPLIED

UPS SHIPPING COSTS STILL APPLY, EXPECT 1-2 DAY DELAY AFTER PURCHASE TO SHIP

https://www.euclidchemical.com/fileshare/ProductFiles/msds/359TBN_05_U.pdf

3"x 5' SBU chairs, also known as Slab Bolster Uppers, are used to support and maintain the elevation of rebar (reinforcing steel)

• • Elevated concrete decks
  • Footings
  • Slabs on metal deck
  • Bridge decks
  • Concrete patios and sidewalks
  • In essence, 3" x 5' SBU chairs are a 

• Holcim's Type S Mortar:

  • High Strength: Type S mortar is known for its superior strength and durability, making it suitable for projects requiring higher bond strength and compressive strength. 

  • Versatile Applications: It's used in various masonry applications, including bricklaying, blockwork, and stonework, both above and below grade. 

  • Load-Bearing Walls: Type S mortar is recommended for load-bearing walls and below-grade applications where higher compressive strengths are needed. 

  • ASTM C91 Compliance: Holcim's masonry cement products, including Type S, meet or exceed ASTM C91 masonry specifications. 

  • Mortamix Masonry Cement: Holcim's Mortamix Masonry Cement is a gray cement that can be used for masonry construction. 

DAY1® Finishing Aid

Brickform DAY1 is a colloidal silica-based finishing aid that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 finishing aid increases cream and extends workability under adverse conditions such as high wind, heat, or low humidity. It eliminates the need to add water to the surface which can lead to premature surface failure. DAY1 does not alter the water-to-cement ratio and becomes a permanent part of the slab so there is no membrane or residue to remove.

DUOGARD_®
VOC COMPLIANT Form Release Agent

DESCRIPTION
DUOGARD multi-reactive form release is composed of an organic chemical that reacts with the alkali content of concrete to form a release film that effectively inhibits the bonding of the concrete to the form. In addition, the product also contains a high molecular weight, non-reactive, chemically inert ingredient to assist in clean, quick form release and removal. These exclusive ingredients combine the effectiveness of a chemically reactive type and an inert barrier type to provide a doubly effective separation … DUO … and the ultimate in form release.

USES
DUOGARD can be used on forms such as wood, steel, aluminum, fiberglass-reinforced, all grades of plywood (pre-oiled, overlaid, LDO, NDO, HDO, MDO), epoxy-coated, and urethane-coated,  as well as fiber tubes.  DO NOT USE on expanded polystyrene (foam), rubber, latex, or latex forms made from SBR or natural rubber.  Wood forms should be saturated prior to first use. DUOGARD increases the life of wood forms by penetrating into the wood to waterproof and prevent deterioration. It also reduces maintenance requirements on metal forms by forming a rustproof film that makes the metal form essentially self-cleaning and rust-free.

DUOGARD should be applied to fiber tube forms even though they may be pre-coated. Tubes will strip much easier, even 60 to 90 days later. If tubes are stripped in 5 to 10 days, hand rubbing is greatly facilitated when tubes are coated with DUOGARD.

DUOGARD also cuts machine cleanup time because it minimizes concrete buildup. Pavers, trucks, mixers, spreader-finishers, buggies, chutes, and other types of equipment should be sprayed daily with DUOGARD for easy cleanup and rust prevention. DUOGARD can be applied on forms for pre-stressed and precast concrete to produce a better and cleaner cast. The product will not stain or discolor concrete. DUOGARD is also available in a true water-based formula, DUOGARD II.

FEATURES/BENEFITS

Liquid Bonding Admixture

AKKRO-7T is a non-redispersable, liquid bonding admixture used to produce polymer modified concrete and mortar. AKKRO-7T is a milky white, water based emulsion of high solids acrylic polymers and modifiers. AKKRO-7T is non-yellowing and has excellent resistance to ultraviolet degradation, heat and most common chemicals. AKKRO-7T does not alter the color of the mixture.

• Formulated to lubricate, condition, and protect your concrete and masonry tools from rust and corrosion. Gator Skin™ is blended to disburse evenly and adhere to the tool surface. Before you use a tool, spray it down to prevent concrete build up, saving time during clean-up. This product is safe to use on most metal, plastic, and rubber surfaces. Test on a small area before coating entire surface. A great product to use on moving parts on hand and walking tools. May also be used as a general lubricant. This is a 1 gallon plastic jug.

  • Lubricate, condition, and protect your tools
  • Prevents build-up of concrete on tools
  • Designed to evenly disburse and adhere to tools
  • Use as a general lubricant
  • 1 gallon jug

A no fiber liquid asphalt coating designed for dampproofing below grade, external vertical concrete or masonry surfaces. Two coats are recommended. Coating forms a tough and pliable film which helps to retard against the entrance of moisture into or through foundation walls. Available in fibered form as well. Can be brushed or spray applied.

**THIS PRODUCT IS FOR SALE AND USE IN OHIO ONLY**

1325-CLEAR water-emulsion, wax-based concrete curing compound is an excellent cure for interior, exterior, horizontal, and vertical concrete surfaces. When properly applied, the product provides a premium-grade film which optimizes water retention. 1300-CLEAR appears white in color when wet, but dries clear. It is also available with a red fugitive dye to visually aid application coverage.

USES

1325-CLEAR is used on both interior and exterior, horizontal or vertical concrete applications, where subsequent surface treatments will not be applied.

FEATURES/BENEFITS

• When properly applied, provides a premium-grade film which optimizes water retention.
• Furnished as a ready-to-use, true water-based compound.
• Produces hard, dense concrete … minimizes hair-checking, thermal cracking, dusting, and other defects.
• Enhances the functional capabilities of concrete by “sealing in” the performance assets of strength and long life.
• Offers a compressive strength significantly greater than improperly cured or uncured concrete.
• Increases tensile strength for greater resistance to cracking and surface crazing.
• Improves resistance to abrasion and the corrosive action of salts and chemicals … minimizes shrinkage.
• Applies quickly and easily with conventional commercial spray equipment.

Preferred by professionals for its light weight yet rugged durability, our Industrial Poly Concrete sprayer is the perfect fit. The 3-gallon poly tank has a wide mouth opening for easy filling and cleaning and a built-in pressure relief valve. Equipped with a 24-inch brass wand, brass shut-off with lock-on feature and metal pump handle.

• 3-Gallon poly tank with wide mouth opening for easy filling and cleaning

• Compatible for most professional concrete applications, curing compound, form oils, waterproofing and coatings

• 24-inch brass wand, nozzle and shut-off with lock-on feature

• Pressure relief valve built into the tank

• Chemical-resistant seals

Single-Component, Non-sag, Polyurethane Hybrid Sealant

Non-Shrink, Non-Staining, Non-Metallic Grout

DIAMOND CLEAR 350 is a low VOC, non-yellowing concrete curing compound and cure & seal used to cure and seal exterior concrete. DIAMOND CLEAR 350 is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent based curing and sealing products while ensuring compliance with VOC laws in regulated areas. DIAMOND CLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

HAZARDOUS SHIPPING RATES APPLIED TO COST

UPS SHIPPING COSTS STILL APPLY, EXPECT 1-2 DAY DELAY AFTER PURCHASE TO SHIP

https://www.euclidchemical.com/fileshare/ProductFiles/msds/359_55_U.pdf

The 1600-WHITE series of water-based, white-pigmented concrete curing compounds are wax-based dispersions with selected white pigments. When properly applied, 1600-WHITE forms a premium-grade membrane, which optimizes water retention. The white pigment reflects the sun’s rays to help keep the concrete surface cooler and prevent excessive heat buildup.

USES
1600-WHITE is ideal for application on exterior, horizontal surfaces, such as highways, airports, and street and curb paving.  1600-WHITE is not recommended for residential applications. The product provides optimum curing when protection from the sun’s heat is desired.

A premium grade cold patch blended with mineral aggregate and selected asphalt. Ready to use from the bag. Seasonally adjusted to its always easy to use. Shovel material into chuckhole and compress. Offers you the same patching material approved and recommended by State and Local Highway Departments and Professional Contractors in convenient 50# bags. DRIVEGUARD Chuckhole Patch and save on repairs. It's easy to use and can be applied in any weather. Achieve a professional and permanent repair (when used over a solid base) in just 3 easy-to-do steps.

Everything you need for cold-weather concrete work in one convenient bundle.

This Winter Concrete Essentials Bundle includes the critical products professional contractors rely on for successful concrete pours and finishing in cold weather conditions. Save time and money by getting all your winter concrete supplies in one package.

Perfect for:

• Cold weather concrete pours
• Winter construction projects
• Freeze protection and curing
• Professional contractors and masons

Trust the experts at All Contractors Supply for your winter concrete needs.

Spectrem® 2

High-Performance Neutral-Cure Silicone Sealant

A single-component medium-modulus silicone sealant ideal for a variety of perimeter caulking and glazing applications, including 2-sided structural glazing. It is intended for use on substrates such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick.

Spectrem® 1

High-Performance Moisture-Cure Silicone Sealant

A single-component, ultra-low modulus silicone sealant ideal for the most demanding dynamically-moving joints, including materials having a high coefficient of linear expansion such as aluminum curtain walls, precast concrete panels, metal panels and window perimeters.

Benefits of Using Spectrem 1 in Your Next Project

High-Performance Neutral-Cure Silicone Sealant

A single-component, medium-modulus silicone sealant that is specifically designed to achieve a watertight seal in expansion joints and for general perimeter caulking of windows, doors and frames, pre-cast and tilt-up panels.

Purpose of a Foam Curing Blanket

• Insulate freshly poured concrete: The blanket traps and retains the heat generated during concrete’s chemical curing process (“heat of hydration”), preventing the concrete from cooling too quickly. This is especially important when ambient temperatures are low (e.g. below ≈ 40–50 °F). 

• Prevent freezing and ensure proper curing: If concrete is allowed to freeze or cure in cold conditions, it can fail to achieve full strength, become weaker, crack, or otherwise degrade. A curing blanket helps avoid that. 

• Maintain moisture and temperature stability: A stable, insulated environment helps concrete hydrate uniformly — improving final strength and durability, reducing risks of surface defects, cracking, or scaling.

🏗️ Common Uses / When to Use It

• Cold-weather pours: When concrete is poured in fall, winter, or early spring, and ambient temps are low. 

• Early-stage curing: Immediately after pouring — for the first 24–48 hours — when concrete is most vulnerable to temperature swings or freezing. Slabs, foundations, sidewalks, decks, and other concrete work exposed to cold or variable weather. Projects needing extended curing time under controlled conditions. 

🔧 Why This Size / Type (6′ × 25′, Foam)

• Portable and manageable size: 6′ × 25′ blankets cover moderate-sized pours (slabs, footings, decks) without being unwieldy, making installation and removal more practical.

• Closed-cell foam insulation: These provide thermal insulation to retain heat and protect against cold — while being weather-resistant, reusable, and relatively easy to place. 

• Reusable & weather-resistant: Many foam curing blankets (like this one) are designed for repeated use and can handle moisture, cold, and job-site conditions.

Formulated to lubricate, condition, and protect your concrete and masonry tools from rust and corrosion. Gator Skin™ is blended to disburse evenly and adhere to the tool surface. Before you use a tool, spray it down to prevent concrete build up, saving time during clean-up. This product is safe to use on most metal, plastic, and rubber surfaces. Test on a small area before coating entire surface. A great product to use on moving parts on hand and walking tools. May also be used as a general lubricant. This 32 oz. plastic bottle is easy to grip and includes a spray top with trigger to easily coat tools.

• Lubricate, condition, and protect your tools
• Prevents build-up of concrete on tools
• Designed to evenly disburse and adhere to tools
• Use as a general lubricant
• Spray trigger for easy application
• 32 oz bottle

Cast magnesium hand float designed for superb floating action on cement. The 16" blade features beveled edges and smooth rounded corners that gives this float the perfect "broken-in" feel. This 3-1/8" wide float is slightly more narrow than standard floats creating a greater curve to the blade for easier floating. The square ends float all the way to the forms and fits in corners. Durable, lightweight magnesium smooths and levels the concrete before finishing. The smooth magnesium blade opens up the pores on the surface to allow proper evaporation. A painted finish protects the blade in transport.. The wood handle is precisely positioned to give the float perfect balance for professional floating with less fatigue. Kraft Tool's hand float with smooth wood handle provides a comfortable grip. The handle's design allows for additional knuckle clearance for the user.

• Tough durable cast magnesium blade
• Greater curve to blade makes for easier floating action

Calcium chloride is highly effective as a dust control agent, because it resists evaporation.

Premier Snow and Ice Melter

When professional grade ice melting materials are required, no material is as effective as Peladow™ calcium chloride pellets.  In the snowy cities of Chicago, Cleveland, Boston, and New York, icy sidewalks and parking lots require a high performance deicer that can burn through hard pack snow and ice.  Peladow™ brand calcium chloride pellets are the de facto standard of pellet deicers in North America, and are available in truckload shipments directly from our locations in Ludington, MI, Mansfield, MA, and New Brunswick, NJ.

Calcium chloride pellets, such as Peladow™, are highly effective at cold temperatures down to -25F.  Peladow™ calcium chloride pellets are the only deicer that will continue to melt ice dams and hard pack snow in extremely cold environments.  For cities like Baltimore, Washington, Richmond, and Philadelphia that get hit hard by record snow falls, Peladow™ continues to be the premier choice for high performance snow-fighting. 

No other ice-melt product works on snow and ice better than Peladow™ Calcium Chloride Pellets.

This has been proven by:

• Comparative performance tests
• Scientific research

Distinguished from Other Ice Melters

Peladow™ Calcium Chloride Pellets

• Contain 90% calcium chloride, the most effective material for melting ice and snow
• Melt ice faster than competing ice-melt materials
• Absorb moisture and release heat to speed melting (ask for sample packs for demonstration)
• Penetrate through ice up to 3 times faster than competing materials
• Perform in a wide range of winter temperatures, even in extreme cold
• Manufactured in the US

Typical Applications

Use Peladow™ to melt snow and ice on:

• Steps – Including granite, concrete, tile, and brick
• Sidewalks – Bluestone, natural flagging, pavers, and pave stone
• Driveways – Asphalt and stamped concrete
• Parking lots

The Professional’s Premier Choice

Professionals use Peladow™ for:

• Commercial and industrial buildings
• Multifamily residential buildings
• Hospitals and university campuses
• Municipal buildings
• Homes
• Casinos

Peladow Ingredients

While most ice melters are composed of one or more, or a blend, of active ingredients, there are performance differences among the following:

• Calcium Chloride (Cacl2)
• Sodium Chloride (NaCl)
• Potassium Chloride (KCl)
• Magnesium Chloride (MgCl2)
• Urea

Peladow™ contains 90% calcium chloride, so you can melt ice faster and across a wider temperature range.

Peladow™ melts ice faster than the competition

In the first 20 minutes at 20’F (-7’C) Peladow™ melts approximately:

• 2X more ice than rock salt
• 3X more ice than urea
• 7X more ice than potassium chloride

The Science of Snow and Ice Control

High performance is scientifically engineered into every Peladow™ pellet by way of it’s:

• Ability to attract moisture from its surroundings
• Heat-generating reaction (please request free sample for demonstration)
• Round shape

Each of these characteristics makes Peladow™ pellets perform better.

RECOMMENDED USES

• Steps – Including granite, concrete, and tile
• Sidewalks – Bluestone, natural flagging, pavers, and pave stone
• Driveways – Asphalt and stamped concrete
• Commercial, municipal & residential buildings, hospitals, and parking lots

An asphalt emulsion which contain no solvents. Comes in convenient squeeze bottle with an adjustable spout to fill cracks up to ½ “ width. Filler is rubberized for flexibility. DO NOT FREEZE.

An asphaltic sealer formulated with sand aggregate and latex to provide additional traction and skid resistance. Ideal for steeply pitched driveways. Beautifies and fills in hairline cracks. DO NOT FREEZE.

A contractor grade asphalt sealer designed to protect and beautify asphalt surfaces, fill in hairline cracks, and provide increased traction. Formulated with a polymer that will increase the life and flexibility of the asphalt surface. DO NOT FREEZE.

MEADOW-PLUG is a specially blended, extremely fast setting, hydraulic cement product designed to instantly stop running water or fluid seepage in concrete or masonry structures. This single-component, high-strength repair mortar permanently plugs non-moving cracks, joints and voids.

USES
Once mixed with water to a putty-like consistency, MEADOW-PLUG may be hand formed to quickly stop active fluid leaks in basements, tunnels, swimming pools, sewers, non-potable water tanks, voids around pipes, and wall tie holes. It seals construction joints between floors and walls. MEADOW-PLUG is versatile enough for either vertical or horizontal applications; below-, above- or on-grade. Its controlled expansion formulation permanently holds the repair in place on exterior, interior, and even underwater installations.

FEATURES/BENEFITS

• Fast initial set/Stops liquid flow immediately.
• Expands as it sets/Forms a permanent water stop.
• Mixes with water only/Easy to use.
• Horizontal, vertical, interior, exterior/Highly versatile.
• Above grade, below grade, underwater/Multi-purpose.
• Non-metallic, non-corrosive/Will not stain.
• May be top-coated within one hour/Saves time.
• Good sulfate resistance/Suitable for wastewater and sewer applications.

DESCRIPTION
VERSASPEED RMC is a fast setting, one component, cementitious, repair mortar
that is shrinkage compensated, pozzolan and microfiber modified, and contains
an integral corrosion inhibitor. It is designed for horizontal and formed vertical
and overhead structural repairs in applications from 1 inch (2.5 cm) to full depth
where a faster return to service is required. This material is non-metallic and
non-staining.
PRODUCT CHARACTERISTICS
FEATURES/BENEFITS
• Great for projects that require
repairs on sloped grades
• Shrinkage compensation and
reduction to minimize cracking
• Pre-mixed with pea gravel, readyto-use
• Low permeability with excellent
freeze-thaw resistance
• Pozzolan and microfiber modified
• Contains an integral corrosion
inhibitor
• Rapid-hardening allows user to
strip forms same day
• Can be coated 5 hours after final
set
COMMON METHODS
• Trowelable (horizontal
applications)
• Pumpable
• Form and pour
PRIMARY APPLICATIONS
• Multi-unit residential
• Industrial / commercial /
institutional floors
• Bridges
• Roads and highways
• Loading docks
• Equipment bases
• Beams
• Vertical & overhead form and pour
applications
• Pavements
• Parking decks and ramps
PHYSICAL PROPERTIES
Single component
Mixes with 4.25 pints of potable water per 50 lb bag/pail
Working Time: 20 to 30 minutes
Initial Set: 20 minutes
Final Set: 30 minutes

Basic Use: Anchor-Tite is a fast-setting, pourable cement compound. It expands as it sets and locks into place. Anchor-Tite sets in 15 minutes and is stronger than concrete in one hour. This densely compacted material develops tremendous strengths achieving a final strength twice as strong as conventional concrete. 

SEALWALL PRODUCTS

Basic Use:  Patch It is a one-part, dry powder cement and sand compound with vinyl modifiers. Just add water and it is ready to use to patch or resurface concrete. It is fast-setting and will adhere to vertical surfaces. Thin section repairs can withstand some of the greatest stresses that patches are subjected to. Patch It is self-curing. 

Features & Benefits

· Tremendous adhesive properties.

· Improved resistance to freeze-thaw cycles.

· Increases impact and flexural strengths. 

· Great for heavy-duty industrial applications.

· Mix with water only - no dangerous or expensive liquids required. 

· Can be feather edged.

• Type M mortar is a high-strength mortar, suitable for heavy-duty applications like below-grade masonry and areas with high wind or seismic activity. 

• It has a 2,500 psi strength rating

Portland cement is a building material that can be used in a wide variety of concrete construction, including commercial and architectural applications. Concrete made with portland cement using proper mix design and construction practices can be durable and resistant to the impact of harsh environmental influences, such as freezing and thawing, exposure to de-icing chemicals, chloride ingress, and sulfate attack. Portland cement is produced to meet ASTM C150 and AASHTO M 85 for one or more of the designation types (I-V) and may additionally meet optional requirements as presented in the product specific Material Certification Report. Uses include:

▪ Bridges ▪ Cast-in-place ▪ Concrete Masonry Units (CMU) ▪ Drains ▪ Grout ▪ Masonry ▪ Pipe ▪ Precast ▪ Pre-stress or post-tension ▪ Ready-mix ▪ Roads ▪ Soil Stabilization ▪ Tilt-up ▪ Water tanks