Structural mesh for a broad range of commercial, infrastructure and residential construction applications. The ease and speed with which ESM is handled and installed saves substantial time during placement and allows for significant reductions in steel area and weight.

Bunk Pricing Available

$8.00 per sheet

$750 per bunk 100 sheets

Non-Crosslink Polyethylene Foam is a closed cell foam available in black, gray, or white. It can be used in all standard concrete and masonry construction applications. It is widely used in residential, commercial, and industrial construction.

Features:

• Extruded from high-quality polyethylene foam
• Peel-Off Strip: Standard on each roll, but can be special ordered without
• Very Flexible: Will not break or crack when used around curves or columns
• Lightweight: Approximately 10 times lighter than traditional expansion joint products
• Accepted: Commonly used by both commercial and residential contractors
• Durable: With near zero water absorption, it will not rot out of the joint over an extended period of time.
• Economical: Easily cut and handled on any jobsite

 MCS SM 300 - item #19021300

Structural mesh for a broad range of commercial, infrastructure and residential construction applications. The ease and speed with which ESM is handled and installed saves substantial time during placement and allows for significant reductions in steel area and weight.

• Rain-resistant technology keeps wet weather from impacting your pour.

• Easier to setup and brace.

• Superior strength-to-weight properties prevent blowouts during concrete form setting.

• Easy to cut and drill at the job site.

• Set and pour multiple columns at one time.

Rebar 1/2"X10' Grade 60

• Used for building concrete forms
• 10 to a Bundle

• Used for building concrete forms
• 10 to a Bundle

• Rain-resistant technology keeps wet weather from impacting your pour.

• Easier to setup and brace.

• Superior strength-to-weight properties prevent blowouts during concrete form setting.

• Easy to cut and drill at the job site.
  

• Set and pour multiple columns at one time.

*LOCAL PICK-UP ONLY*

• Flexible construction forms to fit dips, slopes and inclines in sidewalks and walkways.
• Ultra-ADA Pads are designed for the visually impaired to feel the raised, truncated domes with their feet. This, in combination with the tapping cane, can alert them to a different surface than the surrounding concrete sidewalk and an upcoming intersection.
• Installs quickly and easily using adhesive and anchors (included).
• Better slip resistance than composites.
• Better impact resistance than composites.

Rebar 5/8"X20' Grade 60

Rebar 1/2"X1' Grade 60

DAY1® Finishing Aid

Brickform DAY1 is a colloidal silica-based finishing aid that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 finishing aid increases cream and extends workability under adverse conditions such as high wind, heat, or low humidity. It eliminates the need to add water to the surface which can lead to premature surface failure. DAY1 does not alter the water-to-cement ratio and becomes a permanent part of the slab so there is no membrane or residue to remove.

1/2" X 3 1/2" X 5' Fiber Exp Joint

Bundles = 100' 20pcs

1/2" X 4" X 5' Fiber Exp Joint

Bundles = 100' 20pcs

Cast from the finest magnesium, MARSHALLTOWN Cast Magnesium Hand Floats are designed with a broken-in shape ideal for smoothing and gliding over air entrained concrete. The 16” x 3 ⅛” blades are perfectly balanced, and the cast construction allows for extra knuckle clearance between blade and handle. Choose between a comfortable DuraSoft®, grippy DuraCork®, structural foam, or hardwood handle, available in your choice of standard, round, or large round handle styles. All variations of this product are Made in the USA with Global Materials.

Made from the finest magnesium material for superior durability

Glides over air entrained concrete for a smooth finish

Blade size: 16” x 3 ⅛”

Choose your preferred handle material and style

(6/Case)(7.3#/Case)

REFLEX® rubber expansion joint filler is made from 100% post-consumer rubber & plastic. The majority of the rubber comes from old tires that you see littering the shoulders of highways and overflowing landfills. When using REFLEX in the construction of just one single family residence, builders are able to consume the equivalent of 8.3 passenger car tires. So when planning your next project choose reflex. REFLEX® is a rubber expansion joint filler that is the first of its kind. Made from recycled materials, it is environmentally friendly, top of the line in quality, and made in the USA.

Fastflex (formerly branded as Isoflex) extends the service life of concrete by acting as an insulator in isolation joints and expansion joints while acting as a bond-breaker for sealants.

Fastflex is an ideal choice for concrete isolation joint filler applications around footings, foundations, structures, and curved or round bases and posts.  Typical projects include walkways, parking decks, curbs and gutters, concrete slabs, swimming pools,  and driveways.

This product is a closed-cell polyethylene foam joint filler and is available in continuous lengths in wall thicknesses of 1/2″ and widths from 1” through 6”.

Truper 31206, TR-BY-FC, Tru Pro Short D-Handle Square Point Shovel, 19-Inch Fiberglass, 20-Inch. 20-Inch Pro Grade fiberglass handle with D-grip for balance and control. Heavy duty 14 gauge steel blade for maximum toughness. Reinforced resin -Feetinsert-Feet in handle provides 400 lbs of handle strength. Rivetless, crimped-steel collar ring, solidly connects neck and handle. Thick Fiberglass handle with protective sleeve prevents splintering. Truper has been in the hand tool manufacturing business for over 40 years and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company-Feets global customers. Tru Pro is a premium line true to the specs of contractor-grade tools. The unit is also geared at the consumer who wishes to step up to high-end tools. Best Value at the top end of the market. Tru-Pro products features the heaviest gauge heads available, tab sockets or steel collars, along with a select choice of white ashwood handles for the optimum ratio of resistance and flexibility. Lifetime warranty backs all Tru-pro tools.

Truper 31205, TR-BY-F, Tru Pro Short D-Handle Round Point Shovel, 19-Inch Fiberglass, 20-Inch. 20-Inch Pro Grade fiberglass handle with D-grip for balance and control. Heavy duty 14 gauge steel blade for maximum toughness. Reinforced resin -Feetinsert-Feet in handle provides 400 lbs of handle strength. Rivetless, crimped-steel collar ring, solidly connects neck and handle. Thick Fiberglass handle with protective sleeve prevents splintering. Truper has been in the hand tool manufacturing business for over 40 years and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company-Feets global customers. Tru Pro is a premium line true to the specs of contractor-grade tools. The unit is also geared at the consumer who wishes to step up to high-end tools. Best Value at the top end of the market. Tru-Pro products features the heaviest gauge heads available, tab sockets or steel collars, along with a select choice of white ashwood handles for the optimum ratio of resistance and flexibility. Lifetime warranty backs all Tru-pro tools.

• Forged carbon steel with polished ends
• Overstrike protection to help prevent damage
• Hickory handle

Square-Point Shovel, Mid-Size Steps

• 16 Gauge blade
• 48 in Handle made with premium wood.
• Midsize forward-turned steps for improved foot stability with oval pattern perforations for traction control.
• Larger collar for increased head-to-handle connection strength.
• Innovative EZ Digger wider design provides bigger step support area.

The perfect angle for moving concrete into place! This placer features a strong heavy-duty aluminum blade. The 19-1/2 In. x 4 In. head provides a strong wide base for moving wet cement. A 60 degree angle on the blade provides the optimal curve, or "right angle" to easily push and pull material into place as you spread and level the concrete. The blade is welded to the handle for exceptional toughness on the job. Two aluminum braces connect the blade to the handle for strength and rigidness in the hardest of materials. A 60 In. blue anodized aluminum handle with foam grip completes the tool. The handle measures 1-3/8 In. in diameter for a comfortable grip. The handle is anodized to prevent hands from turning black from oxidation. Ships assembled for immediate use. Bundle of 5 placers, priced per each. Must order in quantities of 5. Must ship via truck.

• Lightweight 19-1/2 In. x 4 In. aluminum head
• 60° angle provides the best working angle
• Head curved to maximize movement
• Heavy-duty aluminum braces provide reinforced strength to head
• Blade is welded to handle for support
• 60 In. Anodized handle with foam grip

• Used for building concrete forms
• 10 to a Bundle

1/2" X 6" X 5' Fiber Exp Joint

• Rain-resistant technology keeps wet weather from impacting your pour.

• Easier to setup and brace.

• Superior strength-to-weight properties prevent blowouts during concrete form setting.

• Easy to cut and drill at the job site.

• Set and pour multiple columns at one time.

Rebar 5/8"x10' Grade 60

Rebar 1/2"X20' Grade 60

Made from lightweight aluminum, MARSHALLTOWN's Ezyscreed™ Combo Screed has a dual-edge design. The sharp edge easily cuts down any high spots to make a level surface and the round edge conveniently creates a smooth surface, mimicking a Bull Float. This combo screed is created in lengths ranging from 3-12 feet, all easily screeding your concrete and can also be used as a check rod. The handle has ridges for better grip and a built-in level that you can use to check your work.

• Lightweight aluminum material

• Comes designed with a sharp and round edge

• Lengths ranging from 3ft-12ft

• Built-in level to check your work

Made from lightweight aluminum, MARSHALLTOWN's Ezyscreed™ Combo Screed has a dual-edge design. The sharp edge easily cuts down any high spots to make a level surface and the round edge conveniently creates a smooth surface, mimicking a Bull Float. This combo screed is created in lengths ranging from 3-12 feet, all easily screeding your concrete and can also be used as a check rod. The handle has ridges for better grip and a built-in level that you can use to check your work.

• Lightweight aluminum material

• Comes designed with a sharp and round edge

• Lengths ranging from 3ft-12ft

• Built-in level to check your work

Our contractor-grade QLT Bull Float Replacement Blades help you produce a quality finish. Choose a round or square blade, both offered in many sizes and a choice between magnesium or aluminum. These replacement blades are Made in the USA with Global Materials.

• Blades range in length from 36" to 72"

• Blades have a width of 8" (203 mm)

• Choose aluminum or magnesium blade

• Made in the USA with Global Materials

• (3/Case)(21.7#/Case)

Broken-in and ready for use! Designed and engineered for the professional finisher. High quality carbon steel finishing trowel features a precision ground edge that is "broke-in" and ready for immediate use. Each trowel is made with state of the art machinery that grinds the blade to just the right dimension for that perfect feel. Greater flexibility and durability reduces fatigue when finishing concrete. The square blade finishes all the way to the corners to complete projects large and small. A high-strength, lightweight cast aluminum mounting stands up to the rigors of cement work. Compression fit stainless steel power pin rivets attach the mounting to the 14" x 4" blade. An oversized toe rivet provides extra strength when applying pressure during finish work. Guaranteed No-Turn handle design locks the handle to mounting. Kraft Tool's premium flat trowel with cork handle (U.S. Des. Patent #D853,821 S) features natural moisture repellent properties for a firm grip even when wet. The cork resists vibrations to minimize fatigue. The cork handle won't absorb dust making clean-up easy. An ergonomic, fatigue reducing design provides for a secure grip for long hours on the job. A similar contour and grip as our soft grip ProForm® handle design.

• Precision balanced, ready to use
• Strong carbon steel blade
• Blade is precision ground for the perfect finish
• Square ends finishes to corners
• High-strength, lightweight aluminum mounting
• Over-sized toe rivet for extra strength
• Compression fit rivet construction for strength
• Stainless steel rivets
• Guaranteed "no-turn" handle
• Unique patented cork handle
• Comfortable grip to minimize fatigue
• Handle repels moisture for secure grip
• Textured, secure grip even when wet

The convenient, pre-perforated tear-off strip incorporated into the product makes it easy to create a void when using cold-applied sealants. Fastflex is particularly ideal for isolation joints accommodating different horizontal and vertical movement between the pavement and a structure.

Fastflex (formerly branded as Isoflex) extends the service life of concrete by acting as an insulator in isolation joints and expansion joints while acting as a bond-breaker for sealants.

Fastflex is an ideal choice for concrete isolation joint filler applications around footings, foundations, structures, and curved or round bases and posts.  Typical projects include walkways, parking decks, curbs and gutters, concrete slabs, swimming pools,  and driveways.

This product is a closed-cell polyethylene foam joint filler and is available in continuous lengths in wall thicknesses of 1/2″ and widths from 1” through 6”.

The convenient, pre-perforated tear-off strip incorporated into the product makes it easy to create a void when using cold-applied sealants. Fastflex is particularly ideal for isolation joints accommodating different horizontal and vertical movement between the pavement and a structure.

SOF® Rod is a bi-cellular polyethylene foam backer rod product. It is extremely flexible and can be used with cold-applied sealants. SOF Rod is non-gassing to prevent sealants from bubbling and failure. It is available in 3/8” to 4” diameter.

SOF® Rod is a bi-cellular polyethylene foam backer rod product. It is extremely flexible and can be used with cold-applied sealants. SOF Rod is non-gassing to prevent sealants from bubbling and failure. It is available in 3/8” to 4” diameter.

SOF® Rod is a bi-cellular polyethylene foam backer rod product. It is extremely flexible and can be used with cold-applied sealants. SOF Rod is non-gassing to prevent sealants from bubbling and failure. It is available in 3/8” to 4” diameter.

HBR® is a closed-cell, polyethylene foam backer rod joint filler that is used as a backing material for elastomeric and other cold-applied sealants. It helps the sealant assume the optimum shape to prolong service life and acts as a barrier to the flow of sealant through the joint. It will not absorb water and is available in ¼” to 6” diameter

$.30 a foot

Quality groover cuts clean, smooth professional control joints every time. A unique tool won't wear out with extended use in concrete like steel groovers. The single-piece casting insures strength and a quality surface. The blade is hand polished for a smooth professional finish every time. This tool creates a groove in wet cement to control expansion and contraction and relieve stress points. The groover creates a 1/4" radius to prevent the edge of the groove from chipping. This 6" groover features a bit that is 1/2" wide and extends to 1" deep. The deep bit extends out from the base to provide ease to the user in moving through the concrete. The closed end groover bit eliminates build up within the tool. The 4-1/2" wide tool provides coverage for control joints on projects large and small. The strong construction allows for work on hard material such as pervious concrete. The comfortable, smooth wood handle is secured to the casting.

• Long-wearing 100% bronze one-piece casting
• Makes 1/2 In. wide, 1 In. deep groove
• Creates 1/4 In. radius to prevent chipping of concrete
• Groover bit extends out to move thru the concrete
• Turned up edges to move smoothly through concrete without gouging
• Hand polished for a clean, smooth joint
• Single-piece closed end bit for a perfect finish
• Cuts control joints in concrete for expansion and contraction
• Heavy-duty construction can be used on pervious concrete
• Easy to clean
• Comfortable smooth wood handle

Level and smooth a large area of concrete before finishing with this lightweight bull float. Made of Genuine Extru-Lite™ Magnesium, which is 30% lighter than aluminum. The float features multiple ribs for extra strength and reinforced for long wear. This 60" x 8" round end float is "broken-in," curved and properly balance to prevent digging. The rounded ends keeps the float from digging into the surface while floating the cement. Each bull float is painted for longer wear. Designed for use with 4-hole brackets (sold separately). Kraft Tool's Double-Tilt Action Brackets (#CC270, #CC290, #CC294, and #CC296) or Single-Tilt Action Brackets (#CC696 or #CC800) are popular choices for brackets. Handle choices are determined by the user's choice in bracket.

• Made of Magnesium, lightweight and longer lasting than aluminum alloy
• Float blade is "broken-in", curved and balanced to prevent digging
• Accepts 4-hole brackets

Broken-in and ready for use! Designed and engineered for the professional finisher. High quality carbon steel finishing trowel features a precision ground edge that is "broke-in" and ready for immediate use. Each trowel is made with state of the art machinery that grinds the blade to just the right dimension for that perfect feel. Greater flexibility and durability reduces fatigue when finishing concrete. The square blade finishes all the way to the corners to complete projects large and small. A high-strength, lightweight cast aluminum mounting stands up to the rigors of cement work. Compression fit stainless steel power pin rivets attach the mounting to the 16" x 4" blade. An oversized toe rivet provides extra strength when applying pressure during finish work. Guaranteed No-Turn handle design locks the handle to mounting. Kraft Tool's premium flat trowel with cork handle (U.S. Des. Patent #D853,821 S) features natural moisture repellent properties for a firm grip even when wet. The cork resists vibrations to minimize fatigue. The cork handle won't absorb dust making clean-up easy. An ergonomic, fatigue reducing design provides for a secure grip for long hours on the job. A similar contour and grip as our soft grip ProForm® handle design.

• Precision balanced, ready to use
• Strong carbon steel blade
• Blade is precision ground for the perfect finish
• Square ends finishes to corners
• High-strength, lightweight aluminum mounting
• Over-sized toe rivet for extra strength
• Compression fit rivet construction for strength
• Stainless steel rivets
• Guaranteed "no-turn" handle
• Unique patented cork handle
• Comfortable grip to minimize fatigue
• Handle repels moisture for secure grip
• Textured, secure grip even when wet

uper 30162, TB-175, Bars Post Hole Digger / Tamping Bar,16-Pound, 69-Inch. 16lb steel demolition bar. For digging and tamping. Rust resistant black finish. Drop forged and heat treated for superior strength and durability. Stock up on quality Truper Tools for other projects today. Truper has been in the hand tool manufacturing business for over 40-year and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company's global customers.

Wedge Point Bar, 60" x 1-1/4" Shank, 18 lb. Wedge Shaped Point. Used to Pry or Move Heavy Objects and to Split or Separate Wood, Metal, or Concrete Forms.

With a 10" handle, this Truper 3 lb. Fiberglass Drilling Hammer is an excellent addition to your toolbox. It easily drives hardened steel nails and chisels and features a shock absorbent "poly guard" for overstrike protection.

• 10" double injected fiberglass handle with rubber grip for improved handling & control
• Shock absorbent "poly guard" for overstrike protection
• Pro-Grade for commercial industrial, or residential use

Truper 33187, MD-8H-16, 8-Pound Sledge Hammer, Hickory Handle, 16-Inch. 8-Pound sledge hammer for heavy demolition. 16-Inch Durable hickory handle is an industry standard for strength and comfort. Shock absorbent -Inchpoly guard-Inch for overstrike protection. Pro-Grade for commercial industrial, or residential use. Stock up on quality Truper Tools for other projects today. Truper has been in the hand tool manufacturing business for over 40 years and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company-Feets global customers.

TRUPER 6 lb engineer hammer with 16" hickory handle and double face forged steel hammer head. Suitable for heavy hammering or demolition work. This unit makes driving spikes or wedges easier.

The Truper TruPro Wheelbarrow FF Tire Steel 6 cu. ft. is a reliable and durable tool designed to make your landscaping tasks easier. With a spacious 6 cu. ft. capacity, it allows you to transport a large amount of materials effortlessly. The sturdy steel construction ensures long-lasting performance, while the flat-free wheel provides smooth and hassle-free maneuverability. Whether you're hauling soil, mulch, or rocks, this wheelbarrow is up to the task. Its rectangular shape and ergonomic handle make it comfortable to use, while the attractive blue, black, and beige color options add a touch of style to your outdoor projects. Upgrade your landscaping game with the Truper TruPro Wheelbarrow FF Tire Steel 6 cu. ft.

FF= FLAT FREE  flat-free for durability and heavy loads

The TR33181 TRUPER 6CF Heavy-Duty Steel Tray Wheelbarrow features a robust steel tray with a 6 cubic foot capacity, designed for demanding tasks. Equipped with durable wood handles for a comfortable grip and a pneumatic tire providing smooth maneuverability over various terrains. This wheelbarrow offers reliable performance for professional and heavy-duty use.

BLOCK TIRE = REQUIRES AIR pneumatic (air-filled) for smooth rides

Truper 33126, R-16MXX, Tru Pro Heavy Duty Road Rake, 16 Teeth, 1-1/2-Inch Section, Ash Handle, 66-Inch. 66" Professional Grade Premium North American White Ash handle. White Ash handles give optimum ratio of resistance and flexibility. 16 teeth road rake holds up to rugged outdoor use. Commercial duty for pro or rugged homeowner use. Tru pro is the contractors choice for professional use. Truper has been in the hand tool manufacturing business for over 40 years and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company's global customers.. Tru Pro is a premium line true to the specs of contractor-grade tools. The unit is also geared at the consumer who wishes to step up to high-end tools. Best Value at the top end of the market. Tru-Pro products features the heaviest gauge heads available, tab sockets or steel collars, along with a select choice of white ashwood handles for the optimum ratio of resistance and flexibility. Lifetime warranty backs all Tru-pro tools.

Truper 31638, the-5f, 5 lb Cutter Mattock, fiberglass handle, 36". 5 lb cutter/ Mattock head combo. 36" double injected fiberglass handle with rubber grip for improved handling & control. Handle has shock absorbent'-feetpoly" guard to protect against overstrike damage. Cuts through shrub & tree roots & chews up stubborn soil. Stock up on quality trooper tools for other projects today. Truper has been in the hand tool manufacturing business for over 40 years & is by far the largest Mexican company in its field. Truper relies on the most advanced modern & efficient technology to guarantee the optimum quality & value of its products & demanding service needs of the company's global customers.

Truper 31614, tp-5f, 5-pound pick mattock, with 36-inch fiberglass handle, 36-inch 5-pound, pick / mattock head combo. 36-inch double injected fiberglass handle with rubber grip for improved handling and control. Handle has shock absorbent -feet-feetpoly-inch guard to protect against overstrike damage. Picks through hard pan soil, cuts small shrub roots, chews up stubborn soil. Stock up on quality trooper tools for other projects today. Truper has been in the hand tool manufacturing business for over 40 years and is by far the largest Mexican company in its field. Truper relies on the most advanced modern and efficient technology to guarantee the optimum quality and value of its products and demanding service needs of the company-feet's global customers.

The Truper Forged Bow Rake (15 Tines, Hardwood Handle) is a heavy-duty garden tool designed for tough landscaping tasks. It features 15 durable tines and a sturdy hardwood handle, making it ideal for leveling soil, spreading mulch, or raking gravel. Built for strength and reliability, this rake is perfect for both professionals and DIY gardeners.

Truper 31210 Tru Pro Square Point Shovel with D-Handle, 30-Inch

• White ash handles give optimum ratio of resistance and flexibility
• Heavy duty 14 gauge steel blade for maximum toughness
• Double riveted, heavy duty, extended socket for solid connection
• D-grip handle assembled with double riveted braces

• Forged carbon steel with polished ends
• Overstrike protection to help prevent damage
• Hickory handle

• Forged carbon steel with polished ends
• Overstrike protection to help prevent damage
• Hickory handle

• Forged carbon steel with polished ends
• Overstrike protection to help prevent damage
• Hickory handle