36"x100' ODOT SILT FENCE

$35.00

A silt fence is a temporary sediment control measure used on construction sites to prevent soil from being carried away by stormwater runoff. It's essentially a barrier made of porous fabric, often geotextile, stretched between posts. The fabric filters out sediment, preventing it from entering nearby waterways like streams, rivers, and lakes, thus protecting water quality

8" Green/Black 200' SiltSoxx OG

$290.00

Filtrexx® SiltSoxx™ is a 3 dimensional tubular device made of FilterMedia™ encased in Filtrexx® Mesh™. It is designed to support stormwater management, sediment & erosion control and pollutant removal Best Management Practices (BMPs). It is generally used in areas where delimiting at risk areas and diverting, cleaning and filtering stormwater runoff is critical. SiltSoxx is often used in combination with other sediment control systems to create a complete solution. Most typical applications are check dam, concrete washout, inlet protection, perimeter control, runoff diversion, slope interruption, sediment traps and diverse filtration systems.

3 dimensional tubular device

Easy to install

Three dimensional

TYPE D WOVEN (12.5X432')(600SY/ROLL) TERRATEX GS

$395.00 $325.00 Save $70.00

Carthage Mills FX-55 is a woven geotextile fabric made of high-tenacity polypropylene yarns woven into a stable network. FX-55 is part of the Carthage FX® Slit-Film Series of woven geotextiles, achieves higher tensile strengths at low elongation (high modulus), is inert to biological degradation, and resistant to naturally encountered chemicals, alkalis, and acids.

AASHTO M 288: Carthage FX-55 meets the geotextile requirements of Class 3, <50% elongation for Separation and Stabilization.

Carthage Mills Type D Woven Geotextile Fabric (12.5X432')(600Sy/Roll)

FUNCTIONS

Our HS Series of Nonwoven Geotextiles are most frequently specified to perform at least one of the following functions:

Filtration
Drainage
Separation
Erosion
Protection

SERIES DESCRIPTION

Carthage Mills’ FX-HS Series of nonwoven geotextiles are often times considered ‘multipurpose’ geotextiles as they can offer immediate and cost effective solutions for many separation, drainage, erosion control and filtration applications.
Carthage Mills’ FX-HS Series of nonwoven geotextiles are constructed of 100% polypropylene staple filaments that have been needle-punched and heat-set for stability. Weights range from 3 to more than 30 ounces per square yard.
Carthage Mills’ FX-HS Series of nonwoven geotextiles exhibits high durability with excellent resistance to puncture and tear, yet easily conforms to the ground and site irregularities for trouble-free installation.

FEATURES AND BENEFITS

The Carthage Mills’ FX-HS Series of nonwoven polypropylene geotextiles are designed to provide cost-saving solutions with most soil types in a wide range of applications and varying site conditions.
Separation and Soil Retention
Filtration and High Permittivity

APPLICATIONS

Carthage Mills’ FX®-HS Series of nonwoven geotextiles can be used in a multitude of applications.
Subsurface Drainage applications or systems along highways, under airfields and athletic fields, and within embankments.
Filtration/drainage in Segmental Retaining Walls (SRW)
Separation under roadways, airport runways, access/haul roads and railroad ballast
Permanent Erosion Control under riprap for slope and shoreline protection
Site Dewatering Bags
Landfill drainage and filtration
Subsurface barriers

TYPE A NON WOVEN (12.5X360′)(500SY/ROLL)

$405.00 $365.00 Save $40.00

Carthage Mills’ FX-30HS is a multipurpose nonwoven geotextile made of polypropylene staple fibers which are formed into a random network, needle punched and heat-set for dimensional stability.

Carthage Mills TYPE A NON WOVEN (12.5X360′)(500SY/ROLL)

FUNCTIONS

Our HS Series of Nonwoven Geotextiles are most frequently specified to perform at least one of the following functions:

Filtration
Drainage
Separation
Erosion
Protection

SERIES DESCRIPTION

Carthage Mills’ FX-HS Series of nonwoven geotextiles are often times considered ‘multipurpose’ geotextiles as they can offer immediate and cost effective solutions for many separation, drainage, erosion control and filtration applications.
Carthage Mills’ FX-HS Series of nonwoven geotextiles are constructed of 100% polypropylene staple filaments that have been needle-punched and heat-set for stability. Weights range from 3 to more than 30 ounces per square yard.
Carthage Mills’ FX-HS Series of nonwoven geotextiles exhibits high durability with excellent resistance to puncture and tear, yet easily conforms to the ground and site irregularities for trouble-free installation.

FEATURES AND BENEFITS

The Carthage Mills’ FX-HS Series of nonwoven polypropylene geotextiles are designed to provide cost-saving solutions with most soil types in a wide range of applications and varying site conditions.
Separation and Soil Retention
Filtration and High Permittivity

APPLICATIONS

Carthage Mills’ FX®-HS Series of nonwoven geotextiles can be used in a multitude of applications.
Subsurface Drainage applications or systems along highways, under airfields and athletic fields, and within embankments.
Filtration/drainage in Segmental Retaining Walls (SRW)
Separation under roadways, airport runways, access/haul roads and railroad ballast
Permanent Erosion Control under riprap for slope and shoreline protection
Site Dewatering Bags
Landfill drainage and filtration
Subsurface barriers

Dandy Bag 30x30

$48.00

Expert Filtration for Sediment-Laden Stormwater

You can tell it’s a Dandy the moment you open it up. Our flagship product, the patented Dandy Bag®, is designed to take a lot of hard knocks. Use the Dandy Bag with flat grates (including round) and mountable curbs to reliably filter out all sludgy sediment-laden stormwater. The suspended solids are allowed to settle out of the slowed flow and are captured by the Bag prior to entering the inlet, ensuring ongoing compliance-level performance.

Unique Product Benefits

Unique, patented design keeps silt, sediment and debris out of storm systems
Reduces or eliminates the need to flush or clean inlets
Bright orange monofilament geotextile can be seen in any weather
Sizes built to fit any inlet in any municipality
Easy to install, maintain and inspect
Can be reused multiple times, unlike other sediment bags
Available with optional oil absorbents

Type B Non Woven Geotextile (12.5X360')(500Sy/Roll)

$825.00 $525.00 Save $300.00

Carthage Mills’ FX-80HS is a multipurpose nonwoven geotextile made of polypropylene staple fibers which are formed into a random network, needle punched and heat set for dimensional stability.

FX-80HS is part of the Carthage FX-HS family series. FX-HS fabrics are lightweight geotextiles appropriate for subsurface drainage, use along highway systems, or on segmented retaining walls

AASHTO M 288: FX-80HS exceeds the geotextile requirements for SEPARATION/CLASS 1 (NONWOVEN), STABILIZATION/CLASS 1 (NONWOVEN) and PERMANENT EROSION CONTROL/CLASS 1 (NONWOVEN – ALL SOIL TYPES).

Carthage Mills Type B Non Woven Geotextile (12.5X360')(500Sy/Roll)

FUNCTIONS

Our HS Series of Nonwoven Geotextiles are most frequently specified to perform at least one of the following functions:

Filtration
Drainage
Separation
Erosion
Protection

SERIES DESCRIPTION

Carthage Mills’ FX-HS Series of nonwoven geotextiles are often times considered ‘multipurpose’ geotextiles as they can offer immediate and cost effective solutions for many separation, drainage, erosion control and filtration applications.
Carthage Mills’ FX-HS Series of nonwoven geotextiles are constructed of 100% polypropylene staple filaments that have been needle-punched and heat-set for stability. Weights range from 3 to more than 30 ounces per square yard.
Carthage Mills’ FX-HS Series of nonwoven geotextiles exhibits high durability with excellent resistance to puncture and tear, yet easily conforms to the ground and site irregularities for trouble-free installation.

FEATURES AND BENEFITS

The Carthage Mills’ FX-HS Series of nonwoven polypropylene geotextiles are designed to provide cost-saving solutions with most soil types in a wide range of applications and varying site conditions.
Separation and Soil Retention
Filtration and High Permittivity

APPLICATIONS

Carthage Mills’ FX®-HS Series of nonwoven geotextiles can be used in a multitude of applications.
Subsurface Drainage applications or systems along highways, under airfields and athletic fields, and within embankments.
Filtration/drainage in Segmental Retaining Walls (SRW)
Separation under roadways, airport runways, access/haul roads and railroad ballast
Permanent Erosion Control under riprap for slope and shoreline protection
Site Dewatering Bags
Landfill drainage and filtration
Subsurface barriers

Chuckhole Cold Patch

$21.50 $18.00 Save $3.50

A premium grade cold patch blended with mineral aggregate and selected asphalt. Ready to use from the bag. Seasonally adjusted to its always easy to use. Shovel material into chuckhole and compress. Offers you the same patching material approved and recommended by State and Local Highway Departments and Professional Contractors in convenient 50# bags. DRIVEGUARD Chuckhole Patch and save on repairs. It's easy to use and can be applied in any weather. Achieve a professional and permanent repair (when used over a solid base) in just 3 easy-to-do steps.