Portland cement is a building material that can be used in a wide variety of concrete construction, including commercial and architectural applications. Concrete made with portland cement using proper mix design and construction practices can be durable and resistant to the impact of harsh environmental influences, such as freezing and thawing, exposure to de-icing chemicals, chloride ingress, and sulfate attack. Portland cement is produced to meet ASTM C150 and AASHTO M 85 for one or more of the designation types (I-V) and may additionally meet optional requirements as presented in the product specific Material Certification Report. Uses include:

▪ Bridges ▪ Cast-in-place ▪ Concrete Masonry Units (CMU) ▪ Drains ▪ Grout ▪ Masonry ▪ Pipe ▪ Precast ▪ Pre-stress or post-tension ▪ Ready-mix ▪ Roads ▪ Soil Stabilization ▪ Tilt-up ▪ Water tanks

ProChalk Level 2 High-Visibility which include our Glo-Orange, Glo-Lime and Yellow formulations for highly visible applications that will wear or wash away naturally in a few days.

ProChalk Level 3 which includes Semi-Permanent Red chalk for weather and water resistant lines that hit and stick for a long time, but will eventually wear away naturally.

• Green pipe for use in gravity sewer and storm drainage applications

• Not intended for pressure use

• For use where systems will not exceed 140° F

• Highly resistant to chemicals commonly found in sewage and industrial waste

• Conforms to Standards: ASTM D 1784, ASTM D 3034, SDR 35, ASTM D 3212 and ASTM F 477

• Require no special tools for cutting and to be installed with solvent cement

• Green pipe for use in gravity sewer and storm drainage applications

• Not intended for pressure use

• For use where systems will not exceed 140° F

• Highly resistant to chemicals commonly found in sewage and industrial waste

• Conforms to Standards: ASTM D 1784, ASTM D 3034, SDR 35, ASTM D 3212 and ASTM F 477

• Require no special tools for cutting and to be installed with solvent cement

The Quality Leather Driver Gloves are offered in quality grain cowhide with keystone thumb construction, hemmed cuffs, shirred elastic back and are unlined.

Product Overview

• Quality Leather Driver Gloves

• Quality grain cowhide

• Keystone thumb construction

• Hemmed cuffs

• Shirred elastic back

• Unlined

• Sold by the Pair 

Quikrete concrete mix is a must have for setting fence posts, lamp posts, deck posts, and mailbox post. This concrete mix is designed for applications where 2" thick or more concrete is required, and is also perfect for sidewalks, ramps, steps, foundation work, or floor. Due to the nature of this product, shipping must be quoted on a per order basis. Quikrete is available for pick-up at Hoover Fence Co. in Newton Falls, OH 44444.

• Mix consists of proportionately blended gravel, sand, and Portland cement.
• Meets compressive strength requirements of ASTM C387.
• 60 minute working time.
• High compression strength of 4000 psi.
• Sold in 80 lb bags.

• Epoxy coated to resist corrosion
• Concrete reinforcing bars are designed to provide the strongest possible mechanical bond between steel and concrete.
• They are furnished in straight lengths
• They may be bent or fabricated to special engineering requirements

Rebar 1/2"X1' Grade 60

Rebar 1/2"X10' Grade 60

Rebar 1/2"X20' Grade 60

Rebar 5/8"x10' Grade 60

Rebar 5/8"X20' Grade 60

The MARSHALLTOWN RotaLeveler™ is the best Bull Float Bracket for all your concrete needs. This bracket fits all two- and four-hole Bull Floats, and it accepts most 1¾” and 1⅜” push-button handles without the need for adapters. This tool is chain driven and enables you to easily adjust, control, and smoothly operate your Bull Float. Made in the USA with Global Materials.

• Mounts all two- and four-hole Bull Floats

• Accepts most 1 ¾” and 1 ⅜” push-button handles

• Features easy control adjustment, smooth operation, and a large protected grease reservoir

• Chain driven and easy to clean

• Made in the USA with Global Materials

• (1/Case)(3.1#/Case)

The Standard Safety Helmet is unvented and offers excellent impact resistance and electrical insulation. There is a six-point nylon suspension with ratchet or pin lock adjustment for sizing. Includes soft, cushioned brow pads.

Product Overview

• Standard Safety Helmet

• Unvented

• Impact Resistance

• Electrical Insulation

• Six-point Nylon Suspension with Ratchet/Pin Lock

• Head Protection

• Cushioned Brow Pads

Sherwin Williams Xylene Solvent, 1-Gallon Can

Sherwin Williams Xylene is a strong aromatic solvent used for thinning and cleanup of oil-based paints, enamels, and lacquers. It has a slower drying time than Toluene, so it is often used to achieve a smooth finish or to have more time to blend oil-based paints together before they dry. This can be used as a general-purpose thinner and cleanup solvent. This product is not soluble in water; not for use with water-based paints.

The F-II Rimless Safety Glasses feature polycarbonate temples and single-piece wrap-around lens for superior protection, scratch resistant polycarbonate lens which filters 99% of harmful UVA & UVB rays, integrated nosepiece, soft, non-slip rubber temple tips which provide a comfortable fit and is ANSI Z87.1-2015 standard certified.

Product Overview

• F-II Rimless Safety

• Polycarbonate Temples

• Single-Piece Wrap-Around Lens

• Scratch Resistant Polycarbonate Lens

• Filters 99% of Harmful UVA & UVB Rays

• Integrated Nosepiece

• Soft, Non-Slip Rubber Temple Tips

• ANSI Z87.1-2015 Standard Certified

 MCS SM 300 - item #19021300

SPEC MIX® Masonry Cement & Sand mortar is a dry preblended mortar mix containing masonry cement and dried masonry sand formulated for superior bond, water retention and board life. SPEC MIX Masonry Cement & Sand mortar is available in color and is engineered for the installation of CMU and brick units where high mortar workability and board life is required for good bond.  It comes in Types M, S and N, and each designation meets ASTM C 270, ASTM C 1714 and CSA A179 requirements. In addition to custom mix designs that are available for specific applications or properties, the standard Masonry Cement & Sand mortar is designed to be compatible with the characteristics of the specified masonry unit. It is acceptable for all types of masonry construction, below or above grade when manufactured to the appropriate specification. Product submittal information available upon request.

SPEC MIX Masonry Cement & Sand mortar is produced under strict manufacturing standards, and complete quality control measures are implemented with each batch. A digital printout displaying the proper proportions per batch may be kept as a permanent record. Each SPEC MIX manufacturer certifies that SPEC MIX masonry products are designed to meet the project specifications and applicable ASTM, TMS and CSA standards.

SPEC MIX® Masonry Cement & Sand Mortar is available in 80 lb. (36.3 kg.) packages for easy hand loading or in 3,000 lb. (1,360.8 kg.) reusable bulk bags to be used with the various

An asphalt emulsion which contain no solvents. Comes in convenient squeeze bottle with an adjustable spout to fill cracks up to ½ “ width. Filler is rubberized for flexibility. DO NOT FREEZE.

The MARSHALLTOWN and QLT Knee Boards provide you with comfort and extra durability on the jobsite. The MARSHALLTOWN Knee Boards are constructed of 18 gauge stainless steel. They feature built-in toe brackets for ease of use and knee pads for comfort. The QLT Stainless Steel Knee Boards are made of 16 gauge stainless steel and have rounded corners and edges to eliminate gouging. The QLT Plastic Knee Boards are lightweight and include two metal foot brackets plus rubber knee pads for comfort.

• Provide extra comfort and durability on the jobsite

• MARSHALLTOWN: stainless steel, built-in toe brackets, knee pads

• QLT: stainless steel, rounded corners and edges

• QLT: plastic, foot brackets, rubber knee pads

MARSHALLTOWN Tape Measures are crucial for all Masonry jobs. These tools come with a soft grip, wide belt clip and are self retracting. Choose between a 25’ Standard, 16’ Brick Spacing, 16’ Modular Spacing or 16' Canadian Spacing Tape Measure to suit your needs.

• Helps you measure your workspace accurately
• Comes with a soft feel grip and a wide belt clip for easy mobility

The original, industry-leading design in safety eyewear, combining stylish protective eyewear with all-around impact protection.

Product Overview

• Incredibly lightweight, weighing less than one ounce.

• Deep, universal-fit temples provide side protection equal to that of large side shields.

• Independently tested and certified by Underwriters Laboratories to meet ANSI Z87.1+ and CSA Z94.3 standards. Also meets ballistic impact resistance requirements for eyewear in US Military Performance Specification MIL PRF-32432 (GL).

The original, industry-leading design in safety eyewear, combining stylish protective eyewear with all-around impact protection.

Product Overview

• Incredibly lightweight, weighing less than one ounce.

• Deep, universal-fit temples provide side protection equal to that of large side shields.

• Independently tested and certified by Underwriters Laboratories to meet ANSI Z87.1+ and CSA Z94.3 standards. Also meets ballistic impact resistance requirements for eyewear in US Military Performance Specification MIL PRF-32432 (GL).

The original, industry-leading design in safety eyewear, combining stylish protective eyewear with all-around impact protection.

Product Overview

• Incredibly lightweight, weighing less than one ounce.

• Deep, universal-fit temples provide side protection equal to that of large side shields.

• Independently tested and certified by Underwriters Laboratories to meet ANSI Z87.1+ and CSA Z94.3 standards. Also meets ballistic impact resistance requirements for eyewear in US Military Performance Specification MIL PRF-32432 (GL).

STRAINER-CI, FITS 10" CROCK, 11-3/4" DIA

STRAINER-CI, FITS 12" CROCK, 14-1/2" DIA

STRAINER-CI, FITS 8" CROCK, 10-1/4" DIA

About this item

• PROUDLY AMERICAN-MADE - Sun X's entire line of non greasy sunscreen lotion is made right here, in the heart of the USA
• 80 MINUTES OF PROTECTION - The FDA-registered formula we use to create our sweat resistant sunscreen travel packets has been tested for up to 80 minutes of protection, making this formula one of the longest-lasting water resistant sunscreens on the market
• MEETS “REEF COMPLIANT” REQUIREMENTS - We are proud to say that our lotion is formulated without the use of Oxybenzone and Octinoxate, allowing the lotion in our SunX30 sunscreen individual packets to meet the requirements of Hawaii’s “REEF Compliant” Act 104
• TRAVEL READY - Our packets of travel size sunscreen SPF 30 lotion are easy to take on the go with each packet being small, lightweight, and carefully sealed! Carry these travel size sunscreen packets with you on your next beach day or pool outing
• WATER-BASED FORMULA - Unlike other oil-based sunscreens, we've developed a water-based, oil free sunscreen for face and body use, that is truly non greasy and rubs in easily, helping you avoid that annoying white cast (white streaks)

Solvent-Based, High-Solids, Non-Yellowing Cure & Seal for Concrete

SUPER DIAMOND CLEAR 350 is a state-of-the-art concrete curing compound and cure & seal specially designed with a high solids formulation to provide the most efficient moisture retention for proper cement hydration and strength gain, as well as protection from liquids, weathering, and abrasion. SUPER DIAMOND CLEAR 350 is particularly well suited for exterior architectural concrete where membrane yellowing is undesirable. It is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent-based curing and sealing products while ensuring compliance with VOC laws in regulated areas. SUPER DIAMOND CLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

HAZARDOUS SHIPPING RATES APPLIED TO COST

UPS SHIPPING COSTS STILL APPLY, EXPECT 1-2 DAY DELAY AFTER PURCHASE TO SHIP

AVAILABLE IN 5 GAL

https://www.euclidchemical.com/fileshare/ProductFiles/msds/359ADC_05_U.pdf

Comes complete and fully assembled - Ready to use

Each TR1 comes with: Trench, ADA Compliant Grate, 2 snap-on end caps

Available in gray body with black or gray grate

Great for:

Residential driveways, garage floors, swimming pool decks

H-20 (235 psi), heavy traffic wheel load rating (Load Class C)

Use on:
Warehouse factory floors (holds up to fully loaded forklift traffic)

 Loading docks

Overall Length

36 in

Overall Width

6-3/4 in

Overall Depth

5 in

Lightweight, True-to-Size Fit.
Snug-fitting TREDS are 25-50% lighter than standard slush boots. Buy TREDS to fit your workboot - not 3 sizes too big. A snug fit will help you glide through the mud. You'll feel the difference after a long days work.

TREDS are tough.
Super tough TREDS are almost impossible to puncture or tear. If damaged, the tear won't "run".

Easy To Pull On and Off.
Stretchy TREDS pull on and off like a dream.

'No Right - No Left' - No Hassle.
Design conforms to your boot. Just grab a piece and pull on.

The material is flexible, so in between jobs, roll down or cuff the upper for a cooler fit during the summer.

• Number one style overboot for concrete work

• Reinforced heel and block-tread pattern sole provides additional traction

• One-piece molded design is not right/left foot specific

• Almost impossible to puncture or tear

• Made in the USA with Global Latex
  

• Use the sizing chart to find your perfect fit.

This design allows the stop sign to fold flush with a standard traffic light pole eliminating "over-hang" potentially hazardous to pedestrians or bicyclists. The sign unfolds quickly to restore traffic control in the event of a power outage. Available in high intensity prismatic or diamond grade reflective sheeting on .080 aluminum. Only available in 30" sign. (Shown here on a standard 2 3/8 round post)

**Hardware not included, 5/16” Turned Eye Bolt & lock are sold separately

This True Temper tamper is ideal for tamping asphalt, gravel, stone, and dirt. The high quality ash handle is flexible and durable. The heavy 10.6-pound steel head makes a great tool for heavy duty construction, industrial, and commercial applications.

Carthage Mills’ FX-30HS is a multipurpose nonwoven geotextile made of polypropylene staple fibers which are formed into a random network, needlepunched and heatset for dimensional stability.

Carthage Mills’ FX-80HS is a multipurpose nonwoven geotextile made of polypropylene staple fibers which are formed into a random network, needlepunched and heatset for dimensional stability.

FX-80HS is part of the Carthage FX-HS family series. FX-HS fabrics are lightweight geotextiles appropriate for subsurface drainage, use along highway systems, or on segmented retaining walls 

AASHTO M 288: FX-80HS exceeds the geotextile requirements for SEPARATION/CLASS 1 (NONWOVEN), STABILIZATION/CLASS 1 (NONWOVEN) and PERMANENT EROSION CONTROL/CLASS 1 (NONWOVEN – ALL SOIL TYPES).

Carthage Mills FX-55 is a woven geotextile fabric made of high-tenacity polypropylene yarns woven into a stable network. FX-55 is part of the Carthage FX® Slit-Film Series of woven geotextiles, achieves higher tensile strengths at low elongation (high modulus), is inert to biological degradation, and resistant to naturally encountered chemicals, alkalis, and acids.

AASHTO M 288: Carthage FX-55 meets the geotextile requirements of Class 3, <50% elongation for Separation and Stabilization.

DESCRIPTION
VERSASPEED RMC is a fast setting, one component, cementitious, repair mortar
that is shrinkage compensated, pozzolan and microfiber modified, and contains
an integral corrosion inhibitor. It is designed for horizontal and formed vertical
and overhead structural repairs in applications from 1 inch (2.5 cm) to full depth
where a faster return to service is required. This material is non-metallic and
non-staining.
PRODUCT CHARACTERISTICS
FEATURES/BENEFITS
• Great for projects that require
repairs on sloped grades
• Shrinkage compensation and
reduction to minimize cracking
• Pre-mixed with pea gravel, readyto-use
• Low permeability with excellent
freeze-thaw resistance
• Pozzolan and microfiber modified
• Contains an integral corrosion
inhibitor
• Rapid-hardening allows user to
strip forms same day
• Can be coated 5 hours after final
set
COMMON METHODS
• Trowelable (horizontal
applications)
• Pumpable
• Form and pour
PRIMARY APPLICATIONS
• Multi-unit residential
• Industrial / commercial /
institutional floors
• Bridges
• Roads and highways
• Loading docks
• Equipment bases
• Beams
• Vertical & overhead form and pour
applications
• Pavements
• Parking decks and ramps
PHYSICAL PROPERTIES
Single component
Mixes with 4.25 pints of potable water per 50 lb bag/pail
Working Time: 20 to 30 minutes
Initial Set: 20 minutes
Final Set: 30 minutes

VOCOMP_®-20
Water-Based, Acrylic, Concrete Curing and Sealing Compound

DESCRIPTION

5 Gallon Pail

VOCOMP-20 water-based acrylic curing and sealing compound is formulated using special acrylic polymers in a true water-based carrier. Once properly applied, VOCOMP-20 provides a durable film for efficient moisture retention.  VOCOMP-20 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual confirmation of coverage. VOCOMP-20 dries clear to provide a transparent sheen finish. The sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish that offers improved resistance to chemicals and wear.

VOCOMP-20 may help minimize hair-checking, premature cracking, dusting, and spalling. However, good concrete and good concreting practices should be used, as VOCOMP-20 is not a cure-all for improperly designed, placed, and/or finished concrete.  Refer to American Concrete Institute (ACI) 201, Guide for Durable Concrete.

USES

VOCOMP-20 water-based acrylic curing and sealing compound may be quickly and easily applied to simultaneously cure and/or seal new interior or exterior as well as vertical or horizontal concrete surfaces. It is ideal for application on sidewalks, basement and garage floors, patios, driveways, and parking areas. VOCOMP-20 dries very quickly to protect and enhance the natural appearance of concrete.

FEATURES/BENEFITS

• Permeable film allows moisture in cured concrete to evaporate.
• Ready-to-use, non-yellowing, water-based compound that cures and/or seals concrete in one quick and easy application.
• Minimizes hair-checking, premature cracking, dusting, and spalling.
• Dries quickly on new concrete to a durable, clear sheen finish that protects and enhances the natural appearance of concrete.
• Ideal for application on interior, exterior, horizontal, and vertical concrete surfaces.
• Tough, durable finish offers improved resistance to chemicals and wear.
• Application tools may be cleaned with soap and water while still wet.
• VOC-compliant.

The MicroMax NS Coverall is a disposable garment made of a lightweight material with microporous film that is breathable and provides protection from dirt, grease, grime, light liquid splashes, and spills. The elastic cuffs help reduce exposure and it has surged seams for protection. Material meets ASTM D3776 and D5034.

Product Overview

• MicroMax NS Coverall

• Lightweight material

• Microporous film that is breathable

• Provides protection from dirt, grease, grime, light liquid splashes, and spills

• The elastic cuffs help reduce exposure and it has surged seams for protection

• Material meets ASTM D3776 and D5034

Structural mesh for a broad range of commercial, infrastructure and residential construction applications. The ease and speed with which ESM is handled and installed saves substantial time during placement and allows for significant reductions in steel area and weight.

Structural mesh for a broad range of commercial, infrastructure and residential construction applications. The ease and speed with which ESM is handled and installed saves substantial time during placement and allows for significant reductions in steel area and weight.

The 2.5 mil Yellow Caution Tape warns pedestrians of restricted access or danger areas. Durable, weather-resistant polyethylene film prevents accidental tearing. Bold, black 2” letters are easy to read. Stays flexible from below freezing to 100°F.

Product Overview

• 2.5 mil Yellow Caution Tape

• Warns pedestrians of restricted access or danger areas

• Durable, weather-resistant polyethylene film prevents accidental tearing

• Bold, black 2” letters are easy to read

• Stays flexible from below freezing to 100°F