Geotextile Fabrics

Odot Type A

US Fabrics  US 80NW

Nonwoven Geotextile - NTPEP APPROVED - GTX-2016-01-093. US 80NW is a nonwoven needlepunched geotextile made of 100% polypropylene staple filaments. US 80NW resists ultraviolet and biological deterioration, rotting, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13.

More details | QPL SDS & Product Data Sheet


US Fabrics US 90NW

Nonwoven Geotextile - NTPEP APPROVED - GTX-2016-01-094. US 90NW is a nonwoven needlepunched geotextile made of 100% polypropylene staple filaments. US 90NW resists ultraviolet deterioration, rotting, biological degradation, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. US 90NW meets the following M.A.R.V. values except where noted:

More details | QPL SDS & Product Data Sheet

ODOT Type B (Rock Channel Protection)

US Fabrics US 200

Woven Geotextile - NTPEP APPROVED - GTX-2016-01-086. US 200 is a woven geotextile made of 100% polypropylene slit film yarns. US 200 resists ultraviolet and biological deterioration, rotting, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. US 200 will satisfy the requirements as outlined in AASHTO M-288-06 for Class 3 Stabilization & Separation applications.

More detailsQPL  SDS & Product Data Sheet

ODOT Type C (Silt Fence)

Thrace-Linq GTF 180 SF

Thrace-LINQ silt fence products excel at controlling silt and sediment runoff, whether at construction sites or contamination-prone watershed areas. Fashioned from UV-stabilized, woven polypropylene, our geotextile silt fences help to satisfy environmental regulations during site development and construction.

More details | QPL SDS & Product Data Sheet

ODOT Type D (Subgrade-Base Separation or Stabilization)

US Fabrics US 200

Woven Geotextile - NTPEP APPROVED - GTX-2016-01-086. US 200 is a woven geotextile made of 100% polypropylene slit film yarns. US 200 resists ultraviolet and biological deterioration, rotting, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. US 200 will satisfy the requirements as outlined in AASHTO M-288-06 for Class 3 Stabilization & Separation applications.

More details | QPLSDS & Product Data Sheets

For a quote or more information please contact us below.

www.allcontractorssupply.com
P: 440-290-0703 F: 216-820-4362 | info@allcontractorssupply.com